Sears 831.15403 user manual ?--W

46. Set an M12 Washer (129) on top of the Short	46
Weight Tube (123). Thread an M12 Nut (128) all
the way onto the Leg Lever Cable (70).
Thread the Leg Lever Cable (70) into the Short
Weight Tube (123). "Nghtenthe M12 Nut (128)
against the M12 Washer (129).

47.Locate the Right Stack Cable (68). Attach the Cable to the Left Top Frame (8) with an M8 x 80mm Bolt (94), an M8 Washer (117), and an M8 Nylon Locknut (115).

48.Wrap the Right Stack Cable (68) under a 90mm Pulley (39). Attach the Pulley, a Small Cable Trap (48), and two Half Finger Guards (42) to the upper hole in the indicated "U'-bracket(50) with an M10 x 52mm Bolt (102) and an M10 Nylon

Locknut (114). Make sure the Cable Trap and Finger Guards are oriented as shown.

49.Wrap the Right Stack Cable (68) over a "V"-pulley(40). Attach the "V"-pulleyand a Cable Trap (49) to the Left Top Frame (8) with an M10 x 55mm Bolt (137) and an M1O Nylon Locknut (114). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley.

50.Wrap the Right Stack Cable (68) around a 90mm Pulley (39). Attach the Pulley and a Small Cable

Trap (48) to the Right Top Frame (7) with an M10 x 110mm Bolt (73) and an M10 Nylon Locknut (114).

94

8

39

_48

50__ 7102

?--W 114

50 ;-73

])

, 68

18