Sears 831.15403 user manual Handles 115

Page 8

7,

8,

9.

Attach the Left Upright (5) to the Left Base (2) with the two indicated M8 x 75mm Carriage Bolts

(84)and two M8 Nylon Locknuts (115). Do not tighten the Locknuts yet.

Hold the Left Top Frame (8) between the Left Upright (5) and the Rear Upright (6). Attach the Pull-up Arm (19) and the Left Top Frame to the Rear Upright with two M8 x 83mm Bolts (89), two M8 Washers (117), and two M8 Nylon Locknuts (115). Make sure the indicated handles point up. Do not tighten the Locknuts yet.

Attach the Left Top Frame (8) to the Left Upright

(5)with two M8 x 83mm Bolts (89), the Left

Upright Plate (37), and two M8 Nylon Locknuts

(115).Note: The Left Upright Plate is wider than the Rear Plate (not shown). Do not tight- en the Locknuts yet.

5

115

2

8

19

Handles

115

8

i'\

115

8

115

37

8

Image 8

Contents Weight System Exerciser Table of Contents Important Precautions Assembled Dimensions StackHeight 82 Width 105 Depth 94 Left Side Press Arm Backrest PressAssembly Frame Assembly 115115 Handles 115 Lock 130114Attach the Front Weight Guides 136 to the Right 114 Ase 59r Cable Assembly Trap is oriented as shown O71Right Upright 4 with an M10 x 68mm Bolt Cable in the groove of the Pulley4O-I 114Page ?--W 116 j114 39 .e Seat Assembly Lock Plate must be able to pivot easily Pad Tubes Pin 83 into the Lock Plate 80 and the Leg Lever Changing the Weight SettingUsing the Lock Plate Locking the DIP Assist Adjusting the BackrestLocking the Weight Stack Weight TopCable Diagrams Page Maintenance Tightening the CablesFour Basic Types of Workouts Personalizing Your Exercise ProgramWarming UP Working OUTMuscle Chart Staying MotivatedM1O x 8Omm Bolt M10 x 45mm Bolt M8 x 83mm Bolt M1O x 38mm ScrewM10 x 89mm Bolt M10 x 1O3mm Bolt M6 x 22mm BoltM6Locknut M12 NutM8 x 80mm Bolt M8 x 70ram BoltExploded DRAWINGmModel No Ro7o4A 69450 119 Jl,,o.I City Description Qty Description12ram Spacer Leg Bumper25mm Round Inner Cap Sears