Sears 831.15403 user manual Pad Tubes

Page 23

67.Slide the Pad Tube (31) through the Right Seat Frame (9). Slide two Small Foam Pads (32) onto the Pad Tube. Press two Foam Caps (58) into the

Pad Tubes.

Slide two Leg Lever Foam Pads (33) onto the Leg Lever (11).

68.Attach the Knee Pad (30) to the Dip Assist (21) with four M6 x 16mm Screws (85).

67

58

32

31

58

33

68

3O

85

85

69.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the following page.

Before using the weight system, pull each cable a few times to make sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on pages 26 and 27 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove the slack by tightening the cables. See MAINTENANCE on page 29.

23

Image 23
Contents Weight System Exerciser Table of Contents Important Precautions Press Assembled DimensionsStack Height 82 Width 105 Depth 94 Left Side Press Arm BackrestAssembly 115 Frame Assembly115 Handles 115 130114 LockAttach the Front Weight Guides 136 to the Right 114 Ase 59r Cable Assembly O71 Trap is oriented as shownCable in the groove of the Pulley Right Upright 4 with an M10 x 68mm Bolt114 4O-IPage ?--W 116 j114 39 .e Seat Assembly Lock Plate must be able to pivot easily Pad Tubes Pin 83 into the Lock Plate 80 and the Leg Lever Changing the Weight SettingUsing the Lock Plate Locking the DIP Assist Adjusting the BackrestLocking the Weight Stack Top WeightCable Diagrams Page Tightening the Cables MaintenanceWorking OUT Four Basic Types of WorkoutsPersonalizing Your Exercise Program Warming UPStaying Motivated Muscle ChartM10 x 1O3mm Bolt M6 x 22mm Bolt M1O x 8Omm Bolt M10 x 45mm Bolt M8 x 83mm BoltM1O x 38mm Screw M10 x 89mm BoltM8 x 70ram Bolt M6LocknutM12 Nut M8 x 80mm BoltExploded DRAWINGmModel No Ro7o4A 69450 119 Jl,,o.I Leg Bumper City DescriptionQty Description 12ram Spacer25mm Round Inner Cap Sears