Sears 831.15403 Adjusting the Backrest, Locking the Weight Stack, Locking the DIP Assist

Page 25

ADJUSTING THE BACKREST

To adjust the position of the left Backrest (28), disen- gaging the Knob (121) from the Left Upright (5) and move the Backrest to the desired position. Reengage the Knob into the Left Upright and the Backrest Frame (27). Make sure the Knob is fully tightened.

LOCKING THE WEIGHT STACK

Lock a weight stack by inserting a Lock Pin (44)

through a Weight Guide (24 or 136) and securingthe

Lock (45) onto the Lock Pin.

LOCKING THE DIP ASSIST

Make sure the Dip Assist (21) is locked when per- forming an exercise that does not require it. To lock the Dip Assist, engage the Dip Assist Latch (67) over the rod on the Rear Upright (6).

121._-_.

24 or 136_.

145

44o -_¢o

o

II

N

II

25

Image 25
Contents Weight System Exerciser Table of Contents Important Precautions Stack Assembled DimensionsHeight 82 Width 105 Depth 94 Left Side Press Arm Backrest PressAssembly 115 Frame Assembly115 Handles 115 130114 LockAttach the Front Weight Guides 136 to the Right 114 Ase 59r Cable Assembly O71 Trap is oriented as shownCable in the groove of the Pulley Right Upright 4 with an M10 x 68mm Bolt114 4O-IPage ?--W 116 j114 39 .e Seat Assembly Lock Plate must be able to pivot easily Pad Tubes Using the Lock Plate Changing the Weight SettingPin 83 into the Lock Plate 80 and the Leg Lever Locking the Weight Stack Adjusting the BackrestLocking the DIP Assist Top WeightCable Diagrams Page Tightening the Cables MaintenancePersonalizing Your Exercise Program Four Basic Types of WorkoutsWarming UP Working OUTStaying Motivated Muscle ChartM1O x 38mm Screw M1O x 8Omm Bolt M10 x 45mm Bolt M8 x 83mm BoltM10 x 89mm Bolt M10 x 1O3mm Bolt M6 x 22mm BoltM12 Nut M6LocknutM8 x 80mm Bolt M8 x 70ram BoltExploded DRAWINGmModel No Ro7o4A 69450 119 Jl,,o.I Qty Description City Description12ram Spacer Leg Bumper25mm Round Inner Cap Sears