Vision Fitness t9700hrt, T9700S manual Troubleshooting Your Treadmill

G E N E R A L

TROUBLESHOOTING YOUR TREADMILL

Our Treadmills are designed to be reliable and easy to use. If, however, you have a problem, these troubleshooting steps may indicate the cause.

PROBLEM: The Console does not light up.

SOLUTION: Check to make sure the Treadmill is connected to a functioning outlet, and that the Treadmill is turned on.

PROBLEM: The Treadmill’s built-in circuit breaker trips repeatedly, shutting-off for no apparent reason.

SOLUTION: The lubricating wax coating on the deck is wearing down and needs to be replenished; contact your VISION FITNESS retailer.

PROBLEM: The Treadmill shuts off when elevated.

SOLUTION: Check to make sure that the power cord is not stretched so tight that when the Treadmill is elevated the cord is pulled out of the wall outlet.

PROBLEM: The running belt does not stay in the center of the Treadmill when you are running on it.

SOLUTION: 1) Check to make sure the Treadmill is level. 2) The running belt is loose and needs to be properly tensioned (see Page 51 for proper procedure).

PROBLEM: The belt moves within 1/4” of -- but does not touch -- the side rail.

SOLUTION: There is nothing wrong, this is normal and will not cause any damage.

NOTE: If the above steps do not remedy the problem, discontinue use, turn the power off and contact your VISION FITNESS retailer.

48