NordicTrack NTL01909.2 manual

Page 11

9.With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (83) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill to prevent it from moving forward or backward.

Firmly tighten the four 3/8" x 3 3/4" Bolts (72). With the help of a second person, lower the treadmill off the cardboard stand.

10.Note the location of the 75 ohm terminal and the audio/video input jack on the treadmill. For the television to operate, the Audio/Video Wire Harness (115) must be connected to the audio/video input jack on the treadmill or a CATV cable or an antenna must be connected to the 75 ohm terminal (see page 12).

9
	72
	83
	72
	Cardboard
	Stand
10	Audio/
	Audio/
	Video
	Input

75 Ohm

Terminal

115

11.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 32). To protect the floor or car- pet from damage, place a mat under the treadmill.

11

Image 11

Contents Model No. NTL01909.2 Serial No QUESTIONS?Table of Contents Important Precautions Page Power Lines Ground Standoff Service Clamp Before YOU Begin Assembly Tighten the Bolts yet Ful not to pinch the Upright Wire HarnessStar Washers 90. Do not tighten the Bolts Tighten the six Bolts Power is Turned ON. Remove the wireTors are not Connected Properly Console MAY be Damaged When Are pinchedCap inside the Storage Latch. Attach Console assembly in the same wayAttach the Left Upright Sleeve not shown to Storage Latch. Make sure to keep the LatchPage Using the AUDIO/VIDEO Wire Harness HOW to Connect AN AntennaHOW to Connect AN External Source Using a Catv CableTroubleshooting HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Care and MaintenancePRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Follow your progress with the displays. The matrix-When youStart the walking belt HOW to USE AN Event Training WorkoutSelect an event training workout Enter your weight HOW to USE a Preset WorkoutSelect a preset workout HOW to Create a Custom Workout HOW to USE a Custom Workout Insert an iFit card and select a workout HOW to USE AN Ifit CardStart the walking belt Select the desired channel Adjust the volumeScan for television channels Select a television sourceHOW to Replace the Batteries in the Remote Control HOW to Operate the Remote ControlHOW to Adjust the Television Settings Exit the Menu Scan and save channelsHOW to Adjust the Cushioning System Information ModeHOW to USE the Stereo Sound System HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Important The treadmill is notSolution Problem ProblemProblem Television reception is poor Problem The chest pulse sensor does not function properlyProblem The television needs to be cleaned Problem The remote control does not function correctlyProblem The television is not receiving a signal Problem The volume cannot be turned upExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty Description Part LIST-Model No. NTL01909.2Qty Description R0310A Exploded Drawing B-Model No. NTL01909.2 Exploded Drawing C-Model No. NTL01909.2 Exploded Drawing D-Model No. NTL01909.2 Exploded Drawing E-Model No. NTL01909.2 Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty