HOW TO CREATE A CUSTOM WORKOUT
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 16.
2.Select a custom workout. To select a custom workout, press the Custom button repeat- edly. When a custom workout is selected, the displays will show the
duration of the workout, the maximum incline set- ting, the workout number, and the maximum speed setting of the workout. In addition, three columns of indicators will scroll in the displays.
Note: If more than three columns of indicators scroll across the matrix, see HOW TO USE A CUSTOM WORKOUT on page 21.
3.Start the walking belt and program the desired speed and incline settings.
Press the Start button to start the workout. A mo- ment after you press the button, the walking belt will begin to move. Hold the handrails and begin walking.
Each custom workout is divided into several one- minute segments. One speed setting and one in- cline setting can be programmed for each seg- ment. To program speed and incline settings for
the first segment, simply adjust the speed and in- cline of the treadmill as desired by pressing the speed and incline buttons.
When the first segment of the workout ends, a se- ries of tones will sound and the current speed and incline settings will be saved in memory. Program a speed setting and an incline setting for the sec- ond segment in the same way.
Continue programming speed and incline settings for as many segments as desired; custom work- outs can have up to forty segments. When you are finished with your workout, press the Stop button twice. The speed and incline settings that you have programmed and the workout time will then be saved in memory.
4.Follow your progress with the displays. See step 5 on page 17.
5.Measure your heart rate if desired. See step 6 on page 17.
6.Turn on the fan if desired. See step 7 on page 17.
7.When you are finished exercising, remove the key from the console.
See step 8 on page 17.
20