NordicTrack NTL01909.2 manual Ful not to pinch the Upright Wire Harness, Tighten the Bolts yet

2. Identify the Right Upright (74), which is marked	2
with a “Right” sticker. Hold the Right Upright				74
near the Right Base Cover (77). See the inset
drawing. Locate the wire tie in the rectangular
hole in the lower end of the Right Upright. Tie
the wire tie securely around the end of the	97
Upright Wire Harness (75). Then, pull the other
end of the wire tie up through the Right Upright	49			Wire
until the Upright Wire Harness is routed com-		Wire	75
pletely through the Right Upright.	73			Tie
Gently pull up on the Upright Wire Harness (75)		Tie	75
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77). Be care-
ful not to pinch the Upright Wire Harness.
Attach the Right Upright (74) to the Base (83)				74
with two 3/8" x 3 3/4" Bolts (72) and two 3/8"	76
Star Washers (90). Do not tighten the Bolts
yet. Note: It may be necessary to tip the tops of
the Uprights forward slightly as you thread the				77
Bolts into the Uprights.					83
Hold the Left Upright (73) near the Left Base
Cover (76). Pull the TV Cable (49) and the AV
Wire (97) into the rectangular hole in the lower
end of the Left Upright and out of the top of the					90
Left Upright. Set the Left Upright on the Base
(83) inside the Left Base Cover. Attach the Left					72
Upright to the Base with two 3/8" x 3 3/4" Bolts
and two 3/8" Star Washers (not shown). Do not
tighten the Bolts yet.
With the help of a second person, lower the
treadmill off the cardboard stand. Save the card-
board stand for step 9.

3. Identify the Right Upright Sleeve (96) and the	3
Left Upright Sleeve (95); the Upright Sleeves
are marked. Slide the Right Upright Sleeve onto
the Right Upright (74), and slide the Left Upright	73	95
Sleeve onto the Left Upright (73).			“Right”
		“Left”
			96
			74
	8