NordicTrack NTL01909.2 manual Assembly

Page 7

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.


Assembly requires the included hex key and your own Phillips screwdriver		and adjustable
wrench	. Use the drawings below to identify the assembly hardware. The number in parentheses

below the drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hardware may be included.

3/8" Nut (38)–2	3/8" Star Washer	#8 x 3/4"	3/8" x 1 1/4"
	(90)–10	Tek Screw (29)–4	Bolt (64)–6
3/8" x 1 3/4" Bolt (117)–1		3/8" x 2" Bolt (113)–1
	3/8" x 3 3/4" Bolt (72)–4

1. Make sure that the power cord is unplugged.	1
With the help of a second person, raise the front
of the treadmill and insert the crossbar on the
Base (83) into the cutout in the cardboard stand
as shown. Serious injury may occur if the
treadmill moves forward or backward and
falls off the cardboard stand. A second per-
son must hold the treadmill until assembly
step 2 is completed to prevent the treadmill
from moving, tipping, or falling.
WARNING: Serious injury	83
may occur if the treadmill moves for-	83
ward or backward and falls off the card-
board stand. A second person must
hold the treadmill until assembly step 2
is completed to prevent the treadmill	Cardboard
from moving, tipping, or falling.	Cardboard
	Stand
	7

Image 7

Contents Model No. NTL01909.2 Serial No QUESTIONS?Table of Contents Important Precautions Page Power Lines Ground Standoff Service Clamp Before YOU Begin Assembly Star Washers 90. Do not tighten the Bolts Ful not to pinch the Upright Wire HarnessTighten the Bolts yet Tighten the six Bolts Power is Turned ON. Remove the wireTors are not Connected Properly Console MAY be Damaged When Are pinchedCap inside the Storage Latch. Attach Console assembly in the same wayAttach the Left Upright Sleeve not shown to Storage Latch. Make sure to keep the LatchPage Using the AUDIO/VIDEO Wire Harness HOW to Connect AN AntennaHOW to Connect AN External Source Using a Catv CableTroubleshooting HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Care and MaintenanceHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Follow your progress with the displays. The matrix-When youSelect an event training workout HOW to USE AN Event Training WorkoutStart the walking belt Select a preset workout HOW to USE a Preset WorkoutEnter your weight HOW to Create a Custom Workout HOW to USE a Custom Workout Insert an iFit card and select a workout HOW to USE AN Ifit CardStart the walking belt Select the desired channel Adjust the volumeScan for television channels Select a television sourceHOW to Replace the Batteries in the Remote Control HOW to Operate the Remote ControlHOW to Adjust the Television Settings Exit the Menu Scan and save channelsHOW to USE the Stereo Sound System Information ModeHOW to Adjust the Cushioning System HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Important The treadmill is notSolution Problem ProblemProblem Television reception is poor Problem The chest pulse sensor does not function properlyProblem The television needs to be cleaned Problem The remote control does not function correctlyProblem The television is not receiving a signal Problem The volume cannot be turned upExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty Description Part LIST-Model No. NTL01909.2Qty Description R0310A Exploded Drawing B-Model No. NTL01909.2 Exploded Drawing C-Model No. NTL01909.2 Exploded Drawing D-Model No. NTL01909.2 Exploded Drawing E-Model No. NTL01909.2 Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT