Tunturi T20 owner manual Basics on Exercising

Page 5

shows heart rate. The ELEVATION Indicator is on and the HEART RATE / ELEVATION Display shows elevation level.

B. PROGRAM DISPLAY: Shows the information in action and chosen by pressing “SCAN/SELECT” Key. P1 to P8 and 3 user-settings modes can be chosen from.

C. TIME DISPLAY: Shows the exercising time with counting up or down. While the treadmill is not running and the SAFETY KEY is on, it can be chosen by pressing “ENTER” then adjusted by pressing “+” or “-“. The range of counting up is from 00:00 to 99:59 and 10:00 to 99:00 with counting down. While counting down to 00:00, the monitor will beep 12 times then the treadmill will stop.

D. SPEED DISPLAY: Shows the speed that the treadmill is providing. It can be adjusted by pressing “SPEED+” and “SPEED- “ keys from 0.5 to 12,5MPH or 0.8 to 20 KPH.

E.DISTANCE DISPLAY: Shows the distance with counting up or down while treadmill is not running and SAFETY KEY is on, it can be chosen by pressing “ENTER” then adjusted by pressing SPEED +/- or ELEVATION +/- .The range of counting up is from 0.00 to 999KPH/MPH and 999 to 0.00 with counting down. While counting down to 0.00, the monitor will beep 12 times then the treadmill will stop.

F.KCAL DISPLAY: Shows the kcal with counting up or down while treadmill is not running and SAFETY KEY is on, it can be chosen by pressing “ENTER” then adjusted by pressing SPEED +/- or ELEVATION +/- .The range of counting up is from 0.00 to 999 KCAL and 999 to 0.00 with counting down. While counting down to 0.00, the monitor will beep 12 times then the treadmill will stop.

G.HEART RATE /ELEVATION DISPLAY: The default value shown is the pulse rate and the HEART RATE Indicator is on. It switches to the value of elevation % while adjusting and the ELEVATION Indicator is on.

OPERATION INSTRUCTIONS (PLEASE READ

CAREFULLY BEFORE USING)

A. SAFETY TIPS:

To start, turn on the power and attach the Safety Key to the monitor. Notice that the machine does not work and off the LED display without the Safety Key attached. Please clip the other end of the Safety Key to the user before exercising to ensure the machine will stop in case the user accidentally runs off the treadmill. Should that happen, the Safety Key will be off the monitor and the treadmill will stop at once to avoid further injury.

B. PROGRAMS SELECTION:

There are 11 programs including 8 preset programs, and 3 User Setting programs to choose from by pressing the “SCAN/SELECT” key.

C. PROGRAM GRAPH:

The graphs in the PROGRAM Display are the speed profile but incline also will change during the exercise. There are total 20 columns in the display.

O W N E R ' S M A N U A L • T 2 0

Without the value of TIME set, each program will last 20 minutes that is 1 minute of each column’s interval. With the value of time set, each interval varies. For example, if the value of time is set to

10 minutes counting down, each interval will be 10 minutes dividing by 20 intervals (10/20=0.5) that is 30 seconds.

D. EXERCISING WITH A SPECIFIC GOAL:

In any programs, user may change the values of TIME before exercising. Press “ENTER” key to select each of them, and “SPEED + & SPEED –“ to change the value. Without changing any of the values and all are 0; users can run as long as possible until it is turned off. Users may also put the desire TIME value to count down. For example, TIME is set to 10 minutes, and then the treadmill will stop after 10 minutes.

E. HEART RATE:

There are two ways to measure your heart rate. One is using the hand-pulse sensor. Another is using chest belt. The hand-pulse sensor is setting for the first priority. Please use both hands to gently hold the Hand Pulse Sensors. There are 2 sensors and 2 pieces of metal part each sensor. Each hand must gently hold both metal pieces to trigger the measuring. The pulse rate will show in the “HEART RATE/ELEVATION” Display. Customer also can use chest belt to measure your heart rate.

BASICS ON EXERCISING

ABOUT YOUR HEALTH

Before you start any training, consult a physician to check your state of health.

If you experience nausea, dizziness or other abnormal symptoms while exercising, stop your workout at once and consult a physician.

To avoid muscular pain and strain, begin and end each workout by stretching.

ABOUT THE EXERCISE ENVIRONMENT

Make sure the exercise environment has adequate ventilation. To avoid catching cold, do not exercise in a draughty place.

Place the treadmill on a firm, level surface. Allow 120 cm or 4 feet of clearance behind the treadmill and 60 cm or 2 feet on either side and in front of the treadmill.

We recommend that the equipment is placed on a protective base.

ABOUT USING THE EQUIPMENT

Always unplug the treadmill from the electrical outlet after each training session.

Only one person may use the equipment at a time.

Keep hands clear of any moving parts. Never place hands, feet or any other objects under the treadmill.

Wear appropriate clothing and shoes when exercising. Make sure your shoelaces are properly

G B

5

Image 5
Contents T20 Important Safety Instructions ContentsAssembly Console Basics on Exercising Operation Maintenance Adjusting the Belt Tension Moving and Storage Technical DataWichtige Sicherheitshinweise InhaltMontage Cockpit + dieselbe Funktion wie Speed + Dieselbe Funktion wie Speed Allgemeines ZUM Training Bedienung Wartung Transport UND Aufbewahrung Technische Daten Table DES Matieres Conseils ET AvertissementsAssemblage Conservez CES InstructionsEtape Même fonction que le bouton Speed Conseils DE Sécurité Généralités SUR Lentraînement Press Start to Begin » Appuyer SUR Start Pour Commencer FonctionnementEntretien Transport ET Rangement Caracteristiques Techniques Opmerkingen EN Adviezen InhoudStap Monitor User SettingHetzelfde als Speed Fitness Training HRC Cardio WerkingOnderhoud Transport EN Opslag Technische Gegevens Avvertenze IndiceFigura MontaggioTasti Delle Funzioni Altezza Esercitazioni Funzionamento Manutenzione Spostamento ED Immagazzinaggio Dati Tecnici Información Y Precauciones Montaje Funciones DE LAS Teclas Segundos para poner a cero todos los valores en modo inicial Aspectos Generales DEL Entrenamiento Funcionamiento Workout Time MantenimientoTraslado Y Almacenaje Datos Técnicos Montering InnehållAnmärkingar OCH Varningar Löpbandet lyfts ut ur lådan Mätare Elevation Allmänt OM TräningHåll händerna tillräckligt långt från rörliga delar Underhåll IgångsättningRengöring AV Löpband Tekniska Data Transport OCH FörvaringAsennus SisältöHuomautukset JA Varoitukset Verkkojohto Yleistä Harjoittelusta Mittari Maton Käyttö Huolto Kuljetus JA Säilytys Tekniset Tiedot USA Page 10.5 11.3 10.9 11.5 Page 583 4034 a