NordicTrack NTB49030 user manual

Page 11

19.Wrap the Butterfly Cable (53) over a “V”-pulley

(46).Attach the “V”-pulley and a Long Cable Trap

(88)to the Center Upright (3) with an M10 x 58mm Button Bolt (75). Make sure the Cable

Trap is oriented to hold the Cable in the groove of the Pulley.

20.Attach the Butterfly Cable (53) to the Right Butterfly Arm (8) with an M8 x 45mm Shoulder Bolt (81), an M8 Washer (94), and an M8 Nylon Locknut (82).

21.Locate the Base Cable (57). Attach the eyelet of the Cable to the Base (1) with an M10 x 192mm Button Bolt (64) and an M10 Nylon Locknut (62).

22.Wrap the Base Cable (57) over a 3 1/2” Pulley

(45).Attach the Pulley to the Double “U”-bracket

(21)with an M10 x 48mm Button Bolt (74) and an

M10 Nylon Locknut (62).

23.Wrap the Base Cable (57) under a 3 1/2” Pulley (45). Attach the Pulley to the Base (1) with an M10 x 192mm Button Bolt (64) and an M10 Nylon Locknut (62).

19
75	3
88	3
88
53	46
	46
20
	81	53
	94
	8
	82
21
57
62
		64
1
22
62		21
62		74
		74
		45
		57
23
57
62		45
62
		1
		64

11

Image 11

Contents Customer HOT Line QUESTIONS?Model No. NTB49030 Serial No Table of Contents Important Precautions Left Side Before YOU BeginRight Side Make Things Easier for Yourself AssemblyDo not tighten the Locknuts yet Page Do not tighten the Locknuts yet Grease Page Page Page Cated rods on the Swivel Arm Side Top Frame 7. Make sure that the CableTool is routed around the bolts in the Top Make sure the Cable is inside of the indiHigh Cable 54 rests in the groove Pulley Trap is oriented to hold the CableGroove of the Pulley Locknut 62. Make sure the Cable rests Groove of the PulleyCable rests in the groove of the Pulley Cable Tool is routed through the boltsTop Frame as indicated if the High Cable Rubs against a bolt, damage may occurCable is routed under the bolts in the Base Make sure the Cable is routed under the boltsCable 55 rests in the groove of the Pulley Locknut 62. Make sure the Cable is Groove of the PulleyCable is routed over the rods on the Swivel Arm Page Adjusting the Safety Spotter AdjustmentsAttaching Accessories Adjusting the Weight RestsAttaching a Barbell to the Cables Adding Weights to the Weight Carriage or BarbellCarriage Cable Cable DiagramsHigh Cable Butterfly CableLow Cable Base CableReplace all cables at least every two years Troubleshooting and MaintenanceTightening the Cables Exercise Guidelines Staying Motivated Muscle ChartCooling Down Thursday Aerobic Exercise Date Exercise Weight Sets RepsDate Aerobic ExerciseMonday Qty Description Part LIST-Model No. NTB49030R0304A Part Identification CHART-Model No. NTB49030Exploded DRAWING-Model No. NTB49030 Limited Warranty Ordering Replacement Parts