HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS
To use iFIT.com CDs or videocassettes, the exercise cycle must be connected to your portable CD player, portable stereo, home stereo, computer with CD play- er, or VCR. See HOW TO CONNECT YOUR CD PLAYER, VCR, OR COMPUTER on page 18. To pur- chase iFIT.com CDs and videocassettes, call toll- free
Follow the steps below to use an iFIT.com CD or video program.
1 Begin pedaling to activate the console.
See step 1 on page 13.
2 Select the iFIT.com mode.
When the console is turned on, the manual mode will be selected. To select the iFIT.com mode, press the iFIT.com button. The indicator above the button will light and the words “IFIT MODE” will appear in the main display.
3 Insert the iFIT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD into your CD player. If you are using an iFIT.com videocassette, insert the videocassette into your VCR.
4 PressVCR. the play button on your CD player or
A moment after the play button is pressed, your personal trainer will begin guiding you through your workout. Simply follow your personal train- er’s instructions.
The program will function in almost the same way as a personal trainer program (see step 3 on page 15). However, an electronic “chirping” sound will alert you when the resistance setting and/or the pace setting is about to change.
Note: If the resistance of the pedals and/or the pace setting does not change when a “chirp” is heard:
•Make sure that the indicator above the iFIT.com button is lit.
•Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.
•Make sure that the audio cable is properly connected and that it is fully plugged in.
5 Monitor your progress with the main display.
See step 4 on page 13.
6 Measure your heart rate if desired.
See step 5 on page 14.
7 Turn on the fan if desired.
See step 6 on page 14.
When the program is finished, the console
8 will automatically turn off.
See step 7 on page 14.
21