Philips HB933 manual Tanning or relaxing HB947 and HB945, Adjusting functions, Last minute

English

,During this minute, you can reset the timer to tan the other side of your body. If you reset the timer during this minute, you avoid the 3-minute waiting time which is necessary to let the tanning lamps cool down after they have switched off.This waiting time does not apply to the infrared lamps.

Tanning or relaxing (HB947 and HB945)

1Fully unwind the mains cord.

2Put the plug in the wall socket.

Adjusting functions

,The function selection button shows the different functions. (Fig. 14)

1Press the function selection button to switch from function to function. (Fig. 15) The symbol that turns yellow shows the function you have selected.

2Choose:

-symbol ¥ if you want to tan your whole body

-symbol ¼ if you want to tan a specific part of your body

-symbol ‚ if you want to relax

-symbol × if you want to warm up a part of your body

Setting the time for a tanning or relax session.

1Consult the chapters ‘Tanning and your health’ and ‘Relaxation and your health’ for the correct tanning or relax time.

2Turn the time-selection ring to set the time of the tanning or relax session (Fig. 16).

Turn the ring clockwise to increase the time and turn it anticlockwise to decrease the time.

3Put on the protective goggles provided.

,Only use these protective goggles when you tan with a Philips tanning appliance. Do not use them for other purposes.

,The protective goggles comply with protection class II according to directive 89/686/EEC.

4Lie down straight below the lamp unit of the appliance.

5Press the START/STOP button to switch on the tanning lamps or the infrared lamps (Fig. 17).

Note:It can take a few seconds for the lamps to go on.This is normal.

6A blinking dot appears on the display next to the time. (Fig. 18) The countdown of the set tanning or relax time starts.

Last minute

,The appliance beeps during the last minute of the session.

,During the last minute, you can repeat the set time. Press the repeat button ( ä). (Fig. 19)

Note:The display shows the set time and starts to count down.The appliance stops beeping.

,During the last minute, you can set a new time.Turn the time-selection ring to the desired time (1) and then press the START/STOP button (2). (Fig. 20)

Note:By setting a new time, you can avoid the 3-minute waiting time which is necessary to let the tanning lamps cool down after they have switched off.This 3-minute waiting time does not apply to the infrared lamps.

,During the last minute of the tanning or relax session, you can press the SNOOZE button to enjoy the warmth of the infrared lamps for 9 more minutes.You can press the SNOOZE button as often as you like. (Fig. 21)

Interrupting the tanning or relax session

,To interrupt a tanning session, press the pause button ( ã). (Fig. 22)

The lamps go out.The cool-down time of 3 minutes blinks on the display and counts down. During these 3 minutes, the lamps cool down. When the time has counted down to 0 and stops blinking, you can switch the appliance back on. Press the START/STOP button or the pause button ( ã) to start the countdown of the remaining session time.

,To interrupt a relax session, press the pause button ( ã). (Fig. 23)

The lamps are switched off and the pause symbol and the remaining time appear on the display.The waiting time does not apply to the infrared lamps, so you can switch the appliance back on whenever you want. Press the STOP/START button or the pause button ( ã) to start the countdown of the remaining time.

Changing the tanning or relax time during a session

,To change the set time during a tanning session, press the START/STOP button (Fig. 24).

The lamps are switched off. Set a new time with the time-selection ring. Wait until the set time stops blinking (this takes 3 minutes because the

lamps have to cool down first).Then press the START/STOP button to switch the appliance back on.

,To change the set time during a relax session, turn the time-selection ring.The cool-down time of 3 minutes does not apply to the infrared lamps.

Remote control (HB947 only)

Use the remote control to perform the following actions (see also section ‘Tanning or relaxing (HB947 and HB945)):

,start/stop the session

,see the remaining session time

,pause the session

,repeat the session

,snooze

You can also use the remote control to select a sound and to set the volume (see also section ‘Stereo Active Speakers & ambient sounds

(HB947/HB945 only)):

1Press the Á or ª button to select a sound.

2Press the + or - button to set the volume.