Star Trac E-TBTe manual YOU have NOW Completed the Embedded Display Installation

Page 16

Step 21.

Now it is time to connect entertainment cable and power to the unit. Connect the in-house entertainment cable to the RF input at the base of the unit.

Take the power supply from the kit and plug the small barrel connector to the DC input. Then take the power adapter cable from the kit and plug it into the power supply and the electrical receptacle.

Step 22.

Turn power on. Perform a visual inspection, and test the features and functions of the unit prior to use.

Note: Refer to the User’s Manual for other settings and instructions.

YOU HAVE NOW COMPLETED THE EMBEDDED DISPLAY INSTALLATION

17

620-7921 Rev A

Image 16
Contents Work Instructions General Unpacking Instructions Verify the following tools are included in the kit Installation Instructions Step Rev a Step YOU have NOW Completed the Total Body Trainer Installation Rev a Embedded Display Console Installation Instructions Rev a Before After Step Step YOU have NOW Completed the Embedded Display Installation Rev a IPod Center Console Installation Instructions Now disconnect the heart rate connector from the display Step Step Step Before After Step Step YOU have NOW Completed the iPod Center Console Installation Rev a MYE Entertainment Center Console Installation Instructions Disconnect the 12-pin serial connector from the display Rev a Step Step Step Step YOU have NOW Completed the MYE Center Console Installation Rev a Personal Viewing Screen PVS Installation Instructions Now disconnect the heart rate connector from the display Screws Step Rev a Tie the iPod cable to the plastic using the 3.5 tie wrap Rev a From PVS Neck From Base Neck Tie Wrap Step Rev a Step Rev a Star Trac Star Trac FitnessTM Manager / Maintenance Mode PB-UB Troubleshooting