Star Trac E-TBTe manual Disconnect the 12-pin serial connector from the display

Page 29

Step 5.

Disconnect the 12-pin serial connector from the display

Step 7.

Be careful with the display and place it face down on top of a non-scratching surface to pro- tect it from being damaged.

Step 6.

Now disconnect the heart rate connector from the display

Step 8.

Using a #2 Phillips head screwdriver, remove the (4) screws that hold bottom side of the dis- play console on, then remove the (1) screw that holds the headphone jack cap.

Note: Retain screws for later use.

30	620-7921 Rev A

Image 29

Contents Work Instructions General Unpacking Instructions Verify the following tools are included in the kit Installation Instructions Step Rev a Step YOU have NOW Completed the Total Body Trainer Installation Rev a Embedded Display Console Installation Instructions Rev a Before After Step Step YOU have NOW Completed the Embedded Display Installation Rev a IPod Center Console Installation Instructions Now disconnect the heart rate connector from the display Step Step Step Before After Step Step YOU have NOW Completed the iPod Center Console Installation Rev a MYE Entertainment Center Console Installation Instructions Disconnect the 12-pin serial connector from the display Rev a Step Step Step Step YOU have NOW Completed the MYE Center Console Installation Rev a Personal Viewing Screen PVS Installation Instructions Now disconnect the heart rate connector from the display Screws Step Rev a Tie the iPod cable to the plastic using the 3.5 tie wrap Rev a From PVS Neck From Base Neck Tie Wrap Step Rev a Step Rev a Star Trac Star Trac FitnessTM Manager / Maintenance Mode PB-UB Troubleshooting