Step 17.
Install the iPod® cable into the iPod® cradle on the front side of the display console by removing the plug from the cradle then inserting the cable through opening. Make sure cable is aligned properly with the display plastics. Press firmly to insure the cable is seated into the cradel.
Step 18.
Tie the iPod® cable to the plastic using the 3.5” tie wrap.
23
4
1
Step 19.
Now install the new head phone jack mount. Use the screw saved from the earlier step to secure the mount to the display.
Step 20.
Identify the cables coming out of the new center console:
1.Center console keypad ribbon cable.
2.Center console power cable.
3.Center console ground cable.
4.
42 |
|