Step 9.
Using a #2 Phillips head screwdriver, remove the (4) screws that hold bottom side of the dis- play console on, then remove the (1) screw that holds the headphone jack cap.
Note: Retain screws for later use.
Step 11.
Using a Phillips head screwdriver, remove the
(4)screws that hold the original center console in place, then remove the center console. You will no longer need the center console and it can be stored away for any possible future use.
21
Step 10.
Next remove the bottom cover, then remove the headphone blank cover. You will no longer need those covers and they can be stored away for any possible future use.
Step 12.
Insert the new center console into the front dis- play. Using a #2 Phillips screwdriver, screw in and secure the (4) screws that were saved from the original center console.