Star Trac E-TBTe manual Step

Page 14

Step 13.

Plug-in the heart rate cable from the neck into the heart rate board connector on the FitCPU board of the embedded display assembly.

Step 15.

Next plug in the coax cable to the coax adapter on the tuner card of the embedded display as- sembly.

15

Step 14.

Plug-in the 12-pin main I/O cable from the neck to the 12 pin connector on the FitCPU board of the embedded display assembly.

Step 16.

Now plug in the DC power cable from the base neck to DC connectors on the embedded dis- play assembly.

620-7921 Rev A

Image 14

Contents Work Instructions General Unpacking Instructions Verify the following tools are included in the kit Installation Instructions Step Rev a Step YOU have NOW Completed the Total Body Trainer Installation Rev a Embedded Display Console Installation Instructions Rev a Before After Step Step YOU have NOW Completed the Embedded Display Installation Rev a IPod Center Console Installation Instructions Now disconnect the heart rate connector from the display Step Step Step Before After Step Step YOU have NOW Completed the iPod Center Console Installation Rev a MYE Entertainment Center Console Installation Instructions Disconnect the 12-pin serial connector from the display Rev a Step Step Step Step YOU have NOW Completed the MYE Center Console Installation Rev a Personal Viewing Screen PVS Installation Instructions Now disconnect the heart rate connector from the display Screws Step Rev a Tie the iPod cable to the plastic using the 3.5 tie wrap Rev a From PVS Neck From Base Neck Tie Wrap Step Rev a Step Rev a Star Trac Star Trac FitnessTM Manager / Maintenance Mode PB-UB Troubleshooting