Star Trac E-TBTe manual Installation Instructions

INSTALLATION INSTRUCTIONS

Step 1.

Route display cables up through upper half of neck through the holes provided.

Step 2.

Insert the upper half of the neck into the lower half.

Caution: Be careful not to pinch any cables between the two sections of the assembled neck.

Step 3.

Install two 5/16” - 18 X 3/4” button head screws into front neck using a 3/16” hex key. Tighten bolts to 200 in-lbs (23 N-m).

6

Step 4.

Secure the neck by tightening the 3/8-16 x 2” socket head cap screw using a 5/16” hex key. Tighten bolt to 300 in-lbs (34 N-m).

620-7921 Rev A