Use the checklist below to ensure the proper installation of the Total Body Trainer:
1. All parts, tools and hardware in the package are accounted for.
2. Personal Viewing Screen assembly is properly mounted and secured.
3. Center console assembly is properly mounted and secured.
4. All screws are tightened and torqued down to their specified values.
5. Display’s mounting bracket and back cover are properly mounted and secured.
6. All cables and harnesses are properly plugged to their respective connectors.
7. The front and back display plastics are properly installed and secured.
8. Cable feed and power adaptor are plugged into the front base of the unit.
9. Verify iPod menu is functioning and user can browse and listen to music
10. TV is setup properly per the owner’s manual, signal is clear and audio is coming from both earphones.
ATTENTION
•Star Trac recommends that the Total Body Trainers be spaced a minimum of 20.0 inches (0.5
m)apart to allow safe and easy ingress and egress. Even more importantly, there must be at least 48 inches (1.25 m) of free space behind the Total Body Trainer.
•As with any motorized equipment, the area where Total Body Trainers are located must be free of obstructions and fixtures with sharp edges to prevent injury in the event that a user trips or loses balance and falls.
For technical assistance call Star Trac Customer Service: 1 800 503 1221
49 |
|