Star Trac E-TBTe manual Step

Page 32

Step 17.

Take the new iPod® cradle from the kit and in- stall it onto display console.

Step 18.

Now connect iPod® cable from the iPod cradle to J10 connector on the center console board.

Before		After

Step 19.

Take the new bottom cover and remove the handlebar plastic tabs.

33

Step 20.

Slide off and remove the CSAFE power connec- tor from the old bottom plastic cover.

620-7921 Rev A

Image 32

Contents Work Instructions General Unpacking Instructions Verify the following tools are included in the kit Installation Instructions Step Rev a Step YOU have NOW Completed the Total Body Trainer Installation Rev a Embedded Display Console Installation Instructions Rev a Before After Step Step YOU have NOW Completed the Embedded Display Installation Rev a IPod Center Console Installation Instructions Now disconnect the heart rate connector from the display Step Step Step Before After Step Step YOU have NOW Completed the iPod Center Console Installation Rev a MYE Entertainment Center Console Installation Instructions Disconnect the 12-pin serial connector from the display Rev a Step Step Step Step YOU have NOW Completed the MYE Center Console Installation Rev a Personal Viewing Screen PVS Installation Instructions Now disconnect the heart rate connector from the display Screws Step Rev a Tie the iPod cable to the plastic using the 3.5 tie wrap Rev a From PVS Neck From Base Neck Tie Wrap Step Rev a Step Rev a Star Trac Star Trac FitnessTM Manager / Maintenance Mode PB-UB Troubleshooting