Star Trac E-TBTe manual Step

Page 24

Step 25.

Connect the CSAFE power cable from the bot- tom cover to J10 connector on the display board.

3

2

4

1

Step 26.

Take the front display plastics with the new cen- ter console to the base unit. Hold the front dis- play plastics at the top with one hand while con- necting the cables and harnesses with the other.

Step 27.

Identify the four cables coming out of the neck and mounting bracket:

1.Heart rate cable

2.Main I/O cable

3.Coax cable

4.DC power cable

Note: The coax and DC power cables are part of the PVS and embedded kits and should be tucked down the neck for possible future use.

25

Step 28.

Plug-in the 12-pin main I/O cable from the neck to the new 12 pin adaptor.

620-7921 Rev A

Image 24

Contents Work Instructions General Unpacking Instructions Verify the following tools are included in the kit Installation Instructions Step Rev a Step YOU have NOW Completed the Total Body Trainer Installation Rev a Embedded Display Console Installation Instructions Rev a Before After Step Step YOU have NOW Completed the Embedded Display Installation Rev a IPod Center Console Installation Instructions Now disconnect the heart rate connector from the display Step Step Step Before After Step Step YOU have NOW Completed the iPod Center Console Installation Rev a MYE Entertainment Center Console Installation Instructions Disconnect the 12-pin serial connector from the display Rev a Step Step Step Step YOU have NOW Completed the MYE Center Console Installation Rev a Personal Viewing Screen PVS Installation Instructions Now disconnect the heart rate connector from the display Screws Step Rev a Tie the iPod cable to the plastic using the 3.5 tie wrap Rev a From PVS Neck From Base Neck Tie Wrap Step Rev a Step Rev a Star Trac Star Trac FitnessTM Manager / Maintenance Mode PB-UB Troubleshooting