2
1
Step 29.
Assemble the front and back display parts to- gether by sliding the bottom of the front display under the 2 tabs at the base first, then pressing front display against the back cover.
Caution: Be careful not to pinch any wires.
Step 30.
Using a Phillips head screw driver, secure the front display to the back with (8) M4 x 0.7 x 19mm long Phillips head screws.
Step 31.
Turn power on. Perform a visual inspection, and test the features and functions of the unit prior to use.
Note: Refer to the User’s Manual for other settings and instructions.
YOU HAVE NOW COMPLETED THE MYE® CENTER CONSOLE INSTALLATION
36 |
|