Step 13.
Using a #2 Phillips head screwdriver, remove the (4) screws that hold the bottom cover of the display console, then remove the (1) screw that holds the headphone jack cap.
Note: Retain screws for later use.
Step 15.
Using a Phillips head screwdriver, remove the
(4)screws that hold the original center console in place, then remove the center console.
Note: You will no longer need the center console and it can be stored away for any possible future use.
Step 14.
Next remove the bottom cover, then remove the headphone blank cover.
Note: You will no longer need the headphone jack cover and it can be stored away for any possible future use.
Step 16.
Insert the new center console into the front dis- play. Using a #2 Phillips screwdriver, screw in and secure the (4) screws that were saved from the original center console.
41 |
|