Star Trac E-TBTe manual Rev a

Page 12

Step 5.

Disconnect the ground cable from the ground quick disconnect tab on the embedded display. Save the cable for later use.

Step 7.

Attach the ground cable to upper left screw on the mounting bracket and secure tightly.

13

Step 6.

Mount the back cover to the display mounting bracket using four (4) M4 x 0.7 x 19mm long Phillips head screws and four (4) M4 flat wash- ers.

Step 8.

Pullout the coax adapter from the tuner card on the embedded display.

620-7921 Rev A

Image 12
Contents Work Instructions General Unpacking Instructions Verify the following tools are included in the kit Installation Instructions Step Rev a Step YOU have NOW Completed the Total Body Trainer Installation Rev a Embedded Display Console Installation Instructions Rev a Before After Step Step YOU have NOW Completed the Embedded Display Installation Rev a IPod Center Console Installation Instructions Now disconnect the heart rate connector from the display Step Step Step Before After Step Step YOU have NOW Completed the iPod Center Console Installation Rev a MYE Entertainment Center Console Installation Instructions Disconnect the 12-pin serial connector from the display Rev a Step Step Step Step YOU have NOW Completed the MYE Center Console Installation Rev a Personal Viewing Screen PVS Installation Instructions Now disconnect the heart rate connector from the display Screws Step Rev a Tie the iPod cable to the plastic using the 3.5 tie wrap Rev a From PVS Neck From Base Neck Tie Wrap Step Rev a Step Rev a Star Trac Star Trac FitnessTM Manager / Maintenance Mode PB-UB Troubleshooting