GENERAL
Before using this product, it is essential to read ALL installation Instructions and this ENTIRE operations manual; the manual describes equipment setup and instructs members on how to use it correctly and safely.
TOOLS REQUIRED
1.Phillips screwdriver, #2 (Included)
2.Hex (Allen) key, 3/16 (Included)
3.Hex (Allen) key, 16” (Included)
4.Hex (Allen) key, 5MM (Included)
5.Torque wrench (not included)
FACTORY CERTIFIED INSTALLER
If you are a Factory Certified Installer you must:
•Adhere to all torque and assembly specifications.
•Use a CALIBRATED TORQUE WRENCH with the necessary hex key sockets
•NOT USE a powered drill, powered driver or powered impact tool for any part of the assembly.
•Complete the assembly checklist is completed on each Star Trac product.
•Complete the final programming, functional and cosmetic checklists for each Star Trac product.
Copyright 2008. Star Trac by Unisen, Inc. Star Trac Fitness, Star Trac®, and the Star Trac Logo are registered trademarks of Unisen Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written permission from Star Trac.
iPod® is a registered trademark of Apple, Inc.
MYE® is a registered trademark of MYE Entertainment LLC.
Every effort has been made to keep this information current; however, periodically, changes are made to the information herein, and these changes will be incorporated into new editions of this publication. All product names and logos are trademarks of their respective owners. Printed in the USA.
3 |