Before |
| After |
|
|
|
Step 21.
Take the new bottom cover and remove the handlebar plastic tabs.
Step 23.
Install the CSAFE power connector on the new bottom plastic cover.
Step 22.
Slide off and remove the CSAFE power connec- tor from the old bottom plastic cover.
Step 24.
Install the new bottom plastic cover onto display, use the screws saved from the earlier step to secure the display bottom. Tighten the screws so they are snug.
Note: Take special care to not pinch any of the ca- bles between the plastics.
24 |
|