S 7 2 0 0 H R T
S7200HRT ENGINEERING MODE
Engineering consists of optional settings and information used by service technicians to assure your product is working in proper order. There are also several default settings that allow you to customize the Suspension Elliptical™ Trainer to fit your needs.
ENTERING AND USING ENGINEERING MODE
•Press and hold the UP ▲and DOWN ▼ RESISTANCE ARROW keys simultaneously for three seconds.
•The console will beep and bring you into engineering mode. Use the UP ▲ and DOWN ▼ RESISTANCE ARROW keys to scroll through the various engineering options.
•Press the ENTER key to select the appropriate engineering option.
•Use the UP ▲ and DOWN ▼ RESISTANCE ARROW keys within each setting to modify the setting
•Press and hold the ENTER key to save the setting.
•To exit engineering mode, press and hold the START key for three seconds.
ENGINEERING OPTIONS INCLUDE:
S E T T I N G
HARDWARE TEST
D E S C R I P T I O N
TEST USED BY SERVICE TECHNICIANS TO TEST ECB SYSTEM
26
LED TEST
DEF TIME SET
DEF LEVEL SET
DEF AGE SET
DEF WEIGHT
BEEPER MODE
SPEED MODE
MACHINE MODE
TEST USED BY SERVICE TECHNICIANS TO TEST LED DISPLAY
SET THE DEFAULT WORKOUT TIME
SET THE DEFAULT RESISTANCE LEVEL
SET THE DEFAULT USER AGE
SET THE DEFAULT USER WEIGHT
TURN THE BEEPER ON OR OFF
SET THE FEEDBACK INFO TO ENGLISH (MILES) OR METRIC (KILOMETERS)
SET TO BIKE OR ELLIPTICAL TRAINER
DOT DISP MODE
ACC TIME
ACC DIST
INCLINE TEST
SET DOT MATRIX DISPLAY WHEN NOT IN USE
MEASURES TOTAL TIME IN HOURS OF USE
MEASURES TOTAL DISTANCE TRAVELED ON THE UNIT
TESTS AT ZERO, MIN., AND MAX.