Precor 9.35 manual Treadmill Safety Features, Using the Safety Clip

Treadmill Safety Features

The treadmill is equipped with certain items that, when used properly, help sustain an enjoyable workout. These items include:

•Safety clip and magnetic safety key

•Safety code

•Handrails

•Power switch

Important: Before exercising, review the Important Safety Instructions found at the beginning of this manual.

Using the Safety Clip

Attach the safety clip to your clothing before each workout. Refer to Diagram 4. A tug on the lanyard disengages the magnetic safety key and trips the safety switch inside the display console which stops the running belt.

If the safety switch trips while you are exercising, the running belt stops and the treadmill enters pause mode. A ten-minute shutdown appears in the upper display.

Note: If the safety switch trips while the banner is scrolling, STOP KEY appears.

To resume exercising, take the following steps:

1.If needed, reattach the safety clip to your clothing and the magnetic safety key onto the display console.

2.Straddle the running belt.

3.Press QUICKSTART.

4.If needed, enter the safety code.

5.Hold onto a handrail while you step on to the running belt with the speed at or below 1 mph or 1 kph.

Note: The treadmill retains your workout statistics if you resume exercising within 10 minutes.

Safety clip

Lanyard

Diagram 4: Attach the safety clip to your clothing

Owner’s Manual: Treadmill Safety Features 9