Weider 831.159821 user manual Wrap the Low Cable 47 around a 90mm Pulley

Page 17

41.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Left Base (2) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).

42.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Left Base (2) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).

43.Wrap the Low Cable (47) around a 90mm Pulley

(38). Attach the Pulley and a Cable Trap (91) to the second set of holes from the bottom of the indicated Double “U”-Bracket (56) with an M10 x 50mm Bolt (62) and an M10 Nylon Locknut (70).

Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

44.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Right Base (1) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).

41

 

 

 

47

 

 

38

 

 

 

70

66

2

 

42

 

 

 

47

38

 

2

 

66

 

70

43

 

 

 

70

 

 

56

91

 

 

62

 

38

47

44

 

 

 

47

 

 

38

 

 

 

66

 

70

 

 

1

 

17

Image 17
Contents SEARS, Roebuck and CO. Hoffman ESTATES, IL Serial Number Decal under seatTable of Contents Important Precautions Left Side Using the weight systemBefore YOU Begin Frame Assembly AssemblyAssembly requires two people Make Things Easier for YourselfSide is on top Nylon LocknutSide shown Do not tighten the M10 Nylon Locknuts 70 yet LargeAttach the Right Seat Frame 5 to the Right With two M10 x 85mm Bolts 60, two M10Do not tighten the M10 Nylon Locknuts Yet 65mm Bolts 63, four M10 Washers 75, Two M10 Nylon LocknutsNot tighten the Locknuts yet ShownRepeat this step with the Left Butterfly Arm ARM AssemblyButterfly Frame must be able to pivot easily Frame must be able to pivot easily Butterfly ArmLocate the High Cable 45. Route the Cable up Cable AssemblyAn M10 Nylon Locknut Groove of the PulleyLocate the Leg Press Cable 95.Attach An M8 Nylon LocknutIng Locate the Butterfly Cable M8 Nylon LocknutPage Attach a 90mm Pulley 38 inside the Right Leg Locate the Leg Lever CablePulley Ing Locate the Low Cable 47. Route the small ballLocknut Wrap the Low Cable 47 around a 90mm Pulley On the Upright M10 Nylon Locknut 70. Be sure the Cable TrapIs turned to hold the Cable in the groove of the Pulley Seat Assembly Screw 68. Do not fully tighten the Screw Frame 9. Attach the tether on the Pins toAttaching the Accessories to a Pulley Station AdjustmentsChanging the Weight Setting Converting the Butterfly ArmsTightening the Cables Adjusting the LEG Press PlatePulley move smoothly Move smoothlyLbs Left Top Weight Resistance ChartWeight High Press LEG Butter LOW Pulley ARM FLY ARM Lever Low Cable Cable Diagrams46 47 3/7 96 95 1/2 95 148 1/4 47 276 3/4 45 116 3/4 Cable ID ChartLeg Press Cable Exercise Guidelines Staying Motivated Muscle ChartCooling Down Model No Full 90 DAY WarrantyIf parts become worn and need to SEARS, Roebuck and CO., Hoffman ESTATES, ILCheck to see if it has been pre-assembled Part Identification CHART-Model No Page Save this Part LIST/EXPLODED Drawing for Future Reference Qty Description Key No. Qty Part LIST-Model NoR0403A DRAWING-Model No