Weider 831.159821 user manual Seat Assembly

	SEAT ASSEMBLY		49			16
49. Attach a Seat (16) to the Right Seat Frame (5)
	with an M6 x 63mm Bolt (90), an M6 Washer
	(35), and two M6 x 16mm Bolts (13).
	Repeat this step with the other Seat (16) and					5
	the Left Seat Frame (not shown).					35
						13
						90
50. Attach a Backrest (15) to the Right Upright (6)			50
	with four M6 x 16mm Bolts (13).
	Repeat this step with the other Backrest (15)					6
	and the Left Upright (not shown).					13
			15			13
51.	Slide the Long Pad Tube (17) through the hole in		51	18
	the Right Leg (73). Slide two Foam Pads (18)
	onto the ends of the Pad Tube. Press two 19mm
	Round Inner Caps (27) into the ends of the Pad		27
	Tube.			17		18
	Repeat this step with the Short Pad Tube (94)			4
	and the Leg Lever (4).		94
						27
						73
52.	Press a 50mm x 70mm Inner Cap (22) into the		52
	indicated end of the Adjustment Tube (88).
	Attach the Leg Press Plate (31) to the Adjustment				87	22
	Tube (88) with an M8 x 65mm Bolt (89), two M8					88	26	71
	Washers (26), and an M8 Nylon Locknut (71).
	Attach the Adjustment Tube (88) to the Leg Press					89
	Frame (30) with the Leg Press Pin (87).	Be sure
	the Pin is in the locked position around the					26
	Leg Press Frame.
						30
								31

19