Weider 831.159821 user manual Check to see if it has been pre-assembled

Page 29

This chart		is provided to help you identify the small parts used in assembly. The number in parenthesis below
each	part refers to the key number of the part from the PART LIST in the center of this manual.		Important:
Some	parts	may have been pre-assembled for shipping. If you cannot find a part in the parts bags,

check to see if it has been pre-assembled.

Note: Assembly is divided into four stages: 1) frame assembly, 2) arm assembly, 3) cable assembly, and 4) seat assembly. The hardware for each stage is packaged separately. Wait until you begin each stage to open the parts bag for that stage.

Image 29

Contents SEARS, Roebuck and CO. Hoffman ESTATES, IL Serial Number Decal under seatTable of Contents Important Precautions Left Side Using the weight systemBefore YOU Begin Frame Assembly AssemblyAssembly requires two people Make Things Easier for YourselfSide is on top Nylon LocknutSide shown Do not tighten the M10 Nylon Locknuts 70 yet LargeAttach the Right Seat Frame 5 to the Right With two M10 x 85mm Bolts 60, two M10Do not tighten the M10 Nylon Locknuts Yet 65mm Bolts 63, four M10 Washers 75, Two M10 Nylon LocknutsNot tighten the Locknuts yet ShownRepeat this step with the Left Butterfly Arm ARM AssemblyButterfly Frame must be able to pivot easily Frame must be able to pivot easily Butterfly ArmLocate the High Cable 45. Route the Cable up Cable AssemblyAn M10 Nylon Locknut Groove of the PulleyLocate the Leg Press Cable 95.Attach An M8 Nylon LocknutIng Locate the Butterfly Cable M8 Nylon LocknutPage Attach a 90mm Pulley 38 inside the Right Leg Locate the Leg Lever CablePulley Ing Locate the Low Cable 47. Route the small ballLocknut Wrap the Low Cable 47 around a 90mm Pulley On the Upright M10 Nylon Locknut 70. Be sure the Cable TrapIs turned to hold the Cable in the groove of the Pulley Seat Assembly Screw 68. Do not fully tighten the Screw Frame 9. Attach the tether on the Pins toAttaching the Accessories to a Pulley Station AdjustmentsChanging the Weight Setting Converting the Butterfly ArmsTightening the Cables Adjusting the LEG Press PlatePulley move smoothly Move smoothlyLbs Left Top Weight Resistance ChartWeight High Press LEG Butter LOW Pulley ARM FLY ARM Lever Low Cable Cable Diagrams46 47 3/7 96 95 1/2 95 148 1/4 47 276 3/4 45 116 3/4 Cable ID ChartLeg Press Cable Exercise Guidelines Staying Motivated Muscle ChartCooling Down Model No Full 90 DAY WarrantyIf parts become worn and need to SEARS, Roebuck and CO., Hoffman ESTATES, ILCheck to see if it has been pre-assembled Part Identification CHART-Model No Page Save this Part LIST/EXPLODED Drawing for Future Reference Qty Description Key No. Qty Part LIST-Model NoR0403A DRAWING-Model No