Weider user manual Part Identification CHART-Model No. WESY99300

Page 26

PART IDENTIFICATION CHART–Model No. WESY99300

1/4" Flat Washer (11)

5/16" Flat Washer (19)

3/8" Flat Washer (17)

1/4" Nylon Locknut (16)

5/16" Nylon Locknut (2)

5/16" Jam Nut (90)

3/8" Nylon Locknut (4)

3/8" Jam Nut (18)

3/8” x 2 1/2” Eye Bolt (83)

5/16" x 1 3/4" Bolt (9)

5/16" x 2 1/2" Bolt (3)

5/16" x 2 3/4" Bolt (20)

5/16" x 2 1/2" Carriage Bolt (1)

1/4" x 2" Bolt (86)

1/4" x 2" Carriage Bolt (85)

1/4" x 2 1/2" Carriage Bolt (12)

#10 x 1” Screw (32)

1/4" x 3/4" Screw (13)

1/4" x 2 1/2" Screw (10)

Image 26
Contents Model No. WESY99300 Serial No Our factoryTable of Contents Limited WarrantyKeep hands and feet away from moving parts Important PrecautionsRead all instructions in this manual New decal in the appropriate locationUsing the weight system Before YOU BeginAssembly Do not tighten Nylon Locknuts yet Locate and open the parts bag labelled Frame AssemblyHead of each Bolt Into the top of the Butterfly Top Frame Attach the Weight Guides 58 to the Butterfly BasePin Grooves 1717 4Lubricate Flat Washers 19, and two 5/16 Nylon LocknutsTighten all nylon locknuts used in steps 1 through Two 5/16 Nylon LocknutsClosest Press Base. This will be a tight fit Locate and open the parts bag labelled ARMBushings should fit onto the ends of the tube Locknut the Press Frame must pivot easilyShown Identify the Short Cable 71. It has a closed loop onNylon Locknut Step One end and a threaded shaft on the otherPress Top Frame End and a loop on the other A 3/8 Nylon LocknutLocknut Butterfly BaseBase 61 with a 3/8 x 2 Bolt 35 and a 3/8 Nylon Locknut BracketEr Pulley will be attached to the Bolt Is oriented as shown Frame 52 with a 3/8 x 3 1/4 Bolt 28, a 3/8 FlatWasher 17, and a 3/8 Nylon Locknut Secure them with the Nylon LocknutLocate and open the parts bag labelled Seat Assembly Secure it with a 1/4 Flat Washer 11 and a 1/4 Nylon LocknutSeat 51 with two 1/4 x 3/4 Screws Apply the Weider PRO 9930 decal in the location shown ADJUSTMENT, beginning on page 21 of this manualMaintenance on PRO71 1.9m 6 ft 72 3.5m 11 ft 73 7.6m 24 ft Cable DiagramsCable ID Chart Long Cable Cise will be reduced AdjustmentCable with two Cable Clips. Adjust the length Nylon Strap 56 can be attached in the same mannerTROUBLE-SHOOTING and Maintenance Ed, move the other PulleyPlates Lbs Top Weight Resistance ChartHigh Arm Butterfly Curl Leg Raise Weight Pulley Press Lbs Ordering Replacement Parts Part No R0501ARemove this Part Identification Chart from the Manual R0501APart Identification CHART-Model No. WESY99300 X 1 1/2 Carriage Bolt Pulley 21 Not shown to scalePage Remove this Part LIST/EXPLODED Drawing from the Manual Qty Description Key No. Qty Long CableModel No. WESY99300