Weider WESY99300 user manual Before YOU Begin, Using the weight system

Page 4

BEFORE YOU BEGIN


Thank you for selecting the innovative and versatile				questions, please contact our Customer Service
WEIDER	® PRO 9930 weight system. The WEIDER		®	Department toll-free at 1-888-936-4266, Mon.–Fri., 8
PRO 9930 offers a unique selection of weight stations				a.m.–6:30 p.m. EST (excluding holidays). To help us
designed to develop every major muscle group of the				assist you, please note the product model number and
body. Whether your goal is to tone your body, build				serial number before calling. The model number is
dramatic muscle size and strength, or improve your				WESY99300. The serial number can be found on a
cardiovascular system, the WEIDER		® PRO 9930 will		decal attached to the weight system (see the front
help you to achieve the results you want.				cover of this manual).
For your benefit, read this manual carefully before				Please use the drawing below to familiarise your-
using the weight system.		If you have additional		self with the major parts of the weight system.

	ASSEMBLED			Lat Bar
	ASSEMBLED
	DIMENSIONS:
	Height:		198 cm
	Width:	165 cm		High Pulley
	Depth:	86 cm		High Pulley
	Depth:	86 cm		Station
				Station
	Butterfly
	Arms
				Backrest
	Backrest
				Press Arm
	Curl Pad
	Adjustment
	Knob			Seat
	Low Pulley
	Station			Leg Press
				Leg Press
				Lever
				Weight
	Foot Plate			Stack
	Foot Plate
				4

Image 4

Contents Model No. WESY99300 Serial No Our factoryTable of Contents Limited WarrantyImportant Precautions Read all instructions in this manualKeep hands and feet away from moving parts New decal in the appropriate locationUsing the weight system Before YOU BeginAssembly Head of each Bolt Locate and open the parts bag labelled Frame AssemblyDo not tighten Nylon Locknuts yet Attach the Weight Guides 58 to the Butterfly Base Pin Grooves 1717 4LubricateInto the top of the Butterfly Top Frame Flat Washers 19, and two 5/16 Nylon LocknutsClosest Two 5/16 Nylon LocknutsTighten all nylon locknuts used in steps 1 through Locate and open the parts bag labelled ARM Bushings should fit onto the ends of the tubePress Base. This will be a tight fit Locknut the Press Frame must pivot easilyNylon Locknut Identify the Short Cable 71. It has a closed loop onShown Press Top Frame One end and a threaded shaft on the otherStep A 3/8 Nylon Locknut LocknutEnd and a loop on the other Butterfly BaseBase 61 with a 3/8 x 2 Bolt 35 and a 3/8 Nylon Locknut BracketEr Pulley will be attached to the Bolt Frame 52 with a 3/8 x 3 1/4 Bolt 28, a 3/8 Flat Washer 17, and a 3/8 Nylon LocknutIs oriented as shown Secure them with the Nylon LocknutLocate and open the parts bag labelled Seat Assembly Secure it with a 1/4 Flat Washer 11 and a 1/4 Nylon LocknutSeat 51 with two 1/4 x 3/4 Screws ADJUSTMENT, beginning on page 21 of this manual Maintenance onApply the Weider PRO 9930 decal in the location shown PROCable ID Chart Cable Diagrams71 1.9m 6 ft 72 3.5m 11 ft 73 7.6m 24 ft Long Cable Adjustment Cable with two Cable Clips. Adjust the lengthCise will be reduced Nylon Strap 56 can be attached in the same mannerTROUBLE-SHOOTING and Maintenance Ed, move the other PulleyHigh Arm Butterfly Curl Leg Raise Weight Pulley Press Lbs Weight Resistance ChartPlates Lbs Top Ordering Replacement Parts Part No R0501ARemove this Part Identification Chart from the Manual R0501APart Identification CHART-Model No. WESY99300 X 1 1/2 Carriage Bolt Pulley 21 Not shown to scalePage Remove this Part LIST/EXPLODED Drawing from the Manual Qty Description Key No. Qty Long CableModel No. WESY99300