Weider WESY99300 Cable Diagrams, Cable ID Chart, 71 1.9m 6 ft 72 3.5m 11 ft 73 7.6m 24 ft

Page 19

CABLE DIAGRAMS

The cable diagrams below and on the next page show the proper routing of the Short Cable (71), the Medium
Cable (72), and the Long Cable (73). The numbers show the correct route for each Cable.	Make sure that the
Cables are routed correctly, that the Pulleys move smoothly, and that the Cable Traps do not touch or
bind the Cables. Incorrect cable routing can damage the weight system.

Short Cable (71)

Medium Cable (72)	2
	2
	1
	4
	3
	5

Cable ID Chart

(71)1.9m (6 ft. 3 in.)

(72)3.5m (11 ft. 6 in.)

(73)7.6m (24 ft. 11 in.)

Image 19

Contents Our factory Model No. WESY99300 Serial NoLimited Warranty Table of ContentsNew decal in the appropriate location Important PrecautionsRead all instructions in this manual Keep hands and feet away from moving partsBefore YOU Begin Using the weight systemAssembly Head of each Bolt Locate and open the parts bag labelled Frame AssemblyDo not tighten Nylon Locknuts yet Flat Washers 19, and two 5/16 Nylon Locknuts Attach the Weight Guides 58 to the Butterfly BasePin Grooves 1717 4Lubricate Into the top of the Butterfly Top FrameClosest Two 5/16 Nylon LocknutsTighten all nylon locknuts used in steps 1 through Locknut the Press Frame must pivot easily Locate and open the parts bag labelled ARMBushings should fit onto the ends of the tube Press Base. This will be a tight fitNylon Locknut Identify the Short Cable 71. It has a closed loop onShown Press Top Frame One end and a threaded shaft on the otherStep Butterfly Base A 3/8 Nylon LocknutLocknut End and a loop on the otherBracket Base 61 with a 3/8 x 2 Bolt 35 and a 3/8 Nylon LocknutEr Pulley will be attached to the Bolt Secure them with the Nylon Locknut Frame 52 with a 3/8 x 3 1/4 Bolt 28, a 3/8 FlatWasher 17, and a 3/8 Nylon Locknut Is oriented as shownSecure it with a 1/4 Flat Washer 11 and a 1/4 Nylon Locknut Locate and open the parts bag labelled Seat AssemblySeat 51 with two 1/4 x 3/4 Screws PRO ADJUSTMENT, beginning on page 21 of this manualMaintenance on Apply the Weider PRO 9930 decal in the location shownCable ID Chart Cable Diagrams71 1.9m 6 ft 72 3.5m 11 ft 73 7.6m 24 ft Long Cable Nylon Strap 56 can be attached in the same manner AdjustmentCable with two Cable Clips. Adjust the length Cise will be reducedEd, move the other Pulley TROUBLE-SHOOTING and MaintenanceHigh Arm Butterfly Curl Leg Raise Weight Pulley Press Lbs Weight Resistance ChartPlates Lbs Top Part No R0501A Ordering Replacement PartsR0501A Remove this Part Identification Chart from the ManualPart Identification CHART-Model No. WESY99300 Pulley 21 Not shown to scale X 1 1/2 Carriage BoltPage Remove this Part LIST/EXPLODED Drawing from the Manual Long Cable Qty Description Key No. QtyModel No. WESY99300