Weider WESY99300 user manual X 1 1/2 Carriage Bolt, Pulley 21 Not shown to scale

Ad

Page 27

1/4" x 1 1/2" Screw (88)

1/4" x 1 1/2" Carriage Bolt (82)

3/8" x 1" Bolt (15)

"V" Pulley (21) (Not shown to scale)

3/8" x 1 3/4" Bolt (22)

3 1/2" Pulley (5)

(Not shown to scale)

3/8" x 2" Bolt (35)

4 1/2" Pulley (34)

(Not shown to scale)

3/8" x 2 1/4" Bolt (81)

Cable Clip (57)

3/8" x 2 1/2" Bolt (6)

3/8" x 3 1/4" Bolt (28)

3/8" x 3 1/2" Bolt (24)

1" Retainer (25)

3/8" x 3 3/4" Bolt (7)

3/8" x 4 3/4" Bolt (23)

3/8" x 8" Bolt (30)

Image 27

Contents Our factory Model No. WESY99300 Serial NoLimited Warranty Table of ContentsNew decal in the appropriate location Important PrecautionsRead all instructions in this manual Keep hands and feet away from moving partsBefore YOU Begin Using the weight systemAssembly Locate and open the parts bag labelled Frame Assembly Head of each BoltDo not tighten Nylon Locknuts yet Flat Washers 19, and two 5/16 Nylon Locknuts Attach the Weight Guides 58 to the Butterfly BasePin Grooves 1717 4Lubricate Into the top of the Butterfly Top FrameTwo 5/16 Nylon Locknuts ClosestTighten all nylon locknuts used in steps 1 through Locknut the Press Frame must pivot easily Locate and open the parts bag labelled ARMBushings should fit onto the ends of the tube Press Base. This will be a tight fitIdentify the Short Cable 71. It has a closed loop on Nylon LocknutShown One end and a threaded shaft on the other Press Top FrameStep Butterfly Base A 3/8 Nylon LocknutLocknut End and a loop on the otherBracket Base 61 with a 3/8 x 2 Bolt 35 and a 3/8 Nylon LocknutEr Pulley will be attached to the Bolt Secure them with the Nylon Locknut Frame 52 with a 3/8 x 3 1/4 Bolt 28, a 3/8 FlatWasher 17, and a 3/8 Nylon Locknut Is oriented as shownSecure it with a 1/4 Flat Washer 11 and a 1/4 Nylon Locknut Locate and open the parts bag labelled Seat AssemblySeat 51 with two 1/4 x 3/4 Screws PRO ADJUSTMENT, beginning on page 21 of this manualMaintenance on Apply the Weider PRO 9930 decal in the location shownCable Diagrams Cable ID Chart71 1.9m 6 ft 72 3.5m 11 ft 73 7.6m 24 ft Long Cable Nylon Strap 56 can be attached in the same manner AdjustmentCable with two Cable Clips. Adjust the length Cise will be reducedEd, move the other Pulley TROUBLE-SHOOTING and MaintenanceWeight Resistance Chart High Arm Butterfly Curl Leg Raise Weight Pulley Press LbsPlates Lbs Top Part No R0501A Ordering Replacement PartsR0501A Remove this Part Identification Chart from the ManualPart Identification CHART-Model No. WESY99300 Pulley 21 Not shown to scale X 1 1/2 Carriage BoltPage Remove this Part LIST/EXPLODED Drawing from the Manual Long Cable Qty Description Key No. QtyModel No. WESY99300