Preset cycle settings, Normal Washer Sounds

Preset cycle settings

Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The preset settings provide the recommended fabric care for the selected cycle. See chart.

Cycle	Soil Level	Water Temp	Spin Speed
	(cycle time)

Sanitary	Normal	Super Hot/Cold	Extra High
	(1:55)

Whitest	Normal	Hot/Cold	Extra High
Whites	(1:00)

Heavy	Normal	Hot/Cold	Extra High
Duty	(1:20)

Normal	Normal	Warm/Cold	High
	(0:40)

Bulky	Normal	Warm/Cold	Low
Items	(0:55)

Quick	Less soil	Warm/Cold	Extra High
Wash	(0:30)

Delicate/	Normal	Warm/Cold	Medium
Casual	(0:35)

Silk	Normal	Cold/Cold	No Spin
	(0:26)

Wool	Normal	Cold/Cold	Medium
	(0:30)

Hand	Normal	Cold/Cold	Low
Washables	(0:30)

Soak	Normal	Warm/Cold	No Spin
	(0:30)

Rinse/Spin	Normal	Cold/Cold	Extra High
	(0:21)

Drain/Spin	Normal	N/A	Extra High
	(0:11)

To change the preset cycle settings

Press the selector of each setting until the desired setting glows.

Normal Washer Sounds

As with any new product, you will hear sounds that you are not accustomed to. You may hear various sounds when the door is locked and unlocked, and during the washing, rinsing, and spinning process. Between changes in wash actions, there will be momentary pauses. You will hear water spraying and splashing during the wash and rinse cycles. These new sounds and pauses are part of normal washer operation.

Options

You can customize your wash by adding “Options” to your cycle selections. You can add or change an option after starting a cycle anytime before the selected option begins. Not all options are available with all cycles.

■See the “Laundry Guide” for an overview of possible options for each Wash Cycle selection.

■You can select more than one option for a cycle. Some options cannot be added to some cycles; for example, Prewash cannot be added to the Quick Wash cycle.

■If an option is available with a selected cycle, the light for that option will glow when selected.

■If an option is unavailable with a selected cycle, there will be a short tone, and the light for that option will not glow when selected.

Delay Wash

Use this to begin the wash cycle later.

■Select Delay Wash until the desired time (in hours) shows in the Estimated Time Remaining display.

■Select START. The countdown to the wash cycle will show in the display window.

Prewash

Use this option for heavily soiled loads that need pretreatment. This option adds a 15-minute prewash and drain to the main wash cycle.

NOTES:

■Add detergent to the Prewash and Main Wash compartments of the Dispenser Drawer.

■When using Prewash, do not use liquid detergent in the Main Wash compartment. Use powdered detergent for the main wash cycle.

NOTE: The Prewash and Auto Soak options cannot be selected in the same cycle.