Miele G 7835 operating instructions Filling the containers with liquid cleaning agents

Page 24

Adding of liquid detergents and neutralizers

Filling the containers with liquid cleaning agents

^Turn the machine off.

^Pull the door of the storage cabinet (with container for liquid agents) open.

^Take the storage container out of the unit, open it and fill with the agent required (observe the color code).

^Insert and secure the siphon tube into container (observe the color code).

Once the storage containers have been filled the message clears.

Remember to refill the containers in time, they should not be allowed to empty completely.

If the container is not in use, the refill function for the dosage system not used can be shut off and a respective display message avoided (see "Program manual - Machine function/Dispensing - Query container").

24

Image 24

Contents Laboratory glassware washer G Contents Contents Important Safety Instructions UseImportant Safety Instructions Important Safety Instructions Using accessories Disposal of an old applianceGuide to the machine Electronic controlsDoor switch h Start button DisplayOn/Off button Cursor left Cursor rightGuide to the machine Opening and closing the door Electric door lockOpening the door To close the doorWater softener Setting the water softener Select UnitEnter Water Hardness Softener CapacityFilling the salt reservoir Salt indicator Automatic mobile unit recognition AWK Mobile unit codingSetting mobile unit coding Mobile unit coding stripSet the program place coding Preparing the items for cleaning ApplicationsLoading the machine Removing excess soilsApplications Height adjustable top basket To adjust the upper basketSpring adapter water connection Example upper basket O 190/1 and lower basket ULaboratory glassware LG Injector unit 1/1 With connection to TAAdding of liquid detergents and neutralizers Preparing the DOS dispensersAdditional DOS modules optional Filling the containers with liquid cleaning agents Dispensing system maintenance Priming the liquid dispensing systemsExternal Dispensing systems OptionalPower switch OperationTurning on To change the operating levelStarting a program Fixed programFree program selection Program sequence Turning offAutomatic mobile unit recognition AWK To change or cancel a program Operating levels B or DOperating levels a or C Cancelling a program Serial interface Cleaning and Care Cleaning the filters in the wash cabinetCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Cleaning the drain pump and non-return valve Tilt the locking clamp to the sideCleaning the water inlet filters Cleaning the control panelCleaning the exterior Cleaning the filterDrying unit TA Cleaning and care Changing the coarse filterOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Caring for the environment Disposal of the packing materialsDisposal of an old appliance Installation Leveling the legsRemoving the lid if necessary Protecting the countertop depending on modelPlumbing Water inletDI-Water connection Drainage Electrical connection This Appliance Must be GroundedRe-assembling the service panel Grounding the machineTechnical Data English MetricPage Page All rights reserved/3404