Miele G 7835 operating instructions Replacing the HEPA-Filter

Page 37

Drying unit (TA) - Cleaning and care

Replacing the HEPA-Filter

The HEPA filter should be changed when the message "CHANGE FINE FILTER" flashes in the display.

,This filter should only be changed by a Miele Service Technician.

A smooth operation of the machine can only be achieved if an original "Miele" HEPA-filter is used.

After the HEPA filter has been changed set the operating timer to zero, as follows:

^Select the program CHANGE TA FINE (see "Operating - B. Free program selection).

^Press the "Start" 6 button.

When the service program has ended, a message appears in the display.

^Confirm the instruction >CONTINUE< with 6.

The service programs CHANGE TA - COARSE and FINE were set by default to program places 62 and 63, but they can be moved to other program places. See "System functions" in the Programming Manual.

37

Image 37

Contents Laboratory glassware washer G Contents Contents Use Important Safety InstructionsImportant Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessoriesElectronic controls Guide to the machineDisplay Door switch h Start buttonOn/Off button Cursor left Cursor rightGuide to the machine Electric door lock Opening and closing the doorOpening the door To close the doorWater softener Select Unit Setting the water softenerEnter Water Hardness Softener CapacityFilling the salt reservoir Salt indicator Mobile unit coding Automatic mobile unit recognition AWKMobile unit coding strip Setting mobile unit codingSet the program place coding Applications Preparing the items for cleaningLoading the machine Removing excess soilsApplications To adjust the upper basket Height adjustable top basketSpring adapter water connection Example upper basket O 190/1 and lower basket UInjector unit 1/1 With connection to TA Laboratory glassware LGPreparing the DOS dispensers Adding of liquid detergents and neutralizersAdditional DOS modules optional Filling the containers with liquid cleaning agents Priming the liquid dispensing systems Dispensing system maintenanceExternal Dispensing systems OptionalOperation Power switchTurning on To change the operating levelFixed program Starting a programFree program selection Turning off Program sequenceAutomatic mobile unit recognition AWK Operating levels B or D To change or cancel a programOperating levels a or C Cancelling a program Serial interface Cleaning the filters in the wash cabinet Cleaning and CareCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Tilt the locking clamp to the side Cleaning the drain pump and non-return valveCleaning the control panel Cleaning the water inlet filtersCleaning the exterior Cleaning the filterChanging the coarse filter Drying unit TA Cleaning and careOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Disposal of the packing materials Caring for the environmentDisposal of an old appliance Leveling the legs InstallationRemoving the lid if necessary Protecting the countertop depending on modelWater inlet PlumbingDI-Water connection Drainage This Appliance Must be Grounded Electrical connectionGrounding the machine Re-assembling the service panelEnglish Metric Technical DataPage Page All rights reserved/3404