Adding of liquid detergents and neutralizers
,Use only cleaning detergents and neutralizers specially designed for lab washers and regard the application recommendations of the manufacturer!
This automatic cleaning machine is fitted with 2 dispensers as standard:
–Dispensing system DOS 1 (blue) to dispense liquid cleaning agent. The dosing rate is 120 ml/min.
–Dispensing system DOS 3 (white) to dispense (acid) media such as neutralizing agent or rinsing agent. The dosing rate is 20 ml/min.
Additional DOS modules (optional):
–Dispensing system DOS 2 (red) to dispense acid media such as neutralizing agent.
The dosing rate is 105 ml/min.
–Dispensing system DOS 4 (green) to dose a
The amounts of cleaning agent required, depending on the application chosen for this machine, are dispensed through these dispensing systems.
Preparing the DOS dispensers
The agents can be filled into 5 l plastic containers, which are color coded for the relevant dispensing system.
When first commissioning, or when the message "FILL CONTAINER DOS 1" and/or DOS 2, 3, 4 flashes in the display after switching on or at the end of a program, fill the storage container with the correct detergent or neutralizer. If the message "CHECK DISPENSING SYSTEM 1" and/or DISPENSING SYSTEM 2, 3, 4 flashes in the display, (the program has been automatically put on hold), check the storage container and the dispensing hoses and refill if necessary.
When first commissioning or when the message "CHECK THE DISPENSING SYSTEM... ", appears, start the
,Exercise caution when handling detergents! These may contain acids, alkalis or disinfectants. Follow the instructions and relevant safety procedures carefully.
Wear protective gloves and goggles.
23