Miele G 7835 Cleaning the drain pump and non-return valve, Tilt the locking clamp to the side

Page 34

Cleaning and Care

Cleaning the drain pump and non-return valve

If water has not been pumped away at the end of a program the drain pump or the non-return valve may be blocked.

^Remove the filter combination out of the wash cabinet.

^ Tilt the locking clamp to the side.

^Pull out the non-return valve and rinse well under running water.

The drain pump is beneath the non-return valve (see arrow).

^Before refitting the non-return valve, check that the drain pump is not blocked. Spin the propeller several times in both directions to check for obstructions.

^Carefully refit the non-return valve and secure it with the locking clamp. Refit and lock the filter in place.

For safety the load should be washed again.

34

Image 34

Contents Laboratory glassware washer G Contents Contents Important Safety Instructions UseImportant Safety Instructions Important Safety Instructions Using accessories Disposal of an old applianceGuide to the machine Electronic controlsOn/Off button Cursor left Door switch h Start buttonDisplay Cursor rightGuide to the machine Opening the door Opening and closing the doorElectric door lock To close the doorWater softener Enter Water Hardness Setting the water softenerSelect Unit Softener CapacityFilling the salt reservoir Salt indicator Automatic mobile unit recognition AWK Mobile unit codingSetting mobile unit coding Mobile unit coding stripSet the program place coding Loading the machine Preparing the items for cleaningApplications Removing excess soilsApplications Spring adapter water connection Height adjustable top basketTo adjust the upper basket Example upper basket O 190/1 and lower basket ULaboratory glassware LG Injector unit 1/1 With connection to TAPreparing the DOS dispensers Adding of liquid detergents and neutralizersAdditional DOS modules optional Filling the containers with liquid cleaning agents External Dispensing systems Dispensing system maintenancePriming the liquid dispensing systems OptionalTurning on Power switchOperation To change the operating levelFixed program Starting a programFree program selection Turning off Program sequenceAutomatic mobile unit recognition AWK Operating levels B or D To change or cancel a programOperating levels a or C Cancelling a program Serial interface Cleaning the filters in the wash cabinet Cleaning and CareCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Cleaning the drain pump and non-return valve Tilt the locking clamp to the sideCleaning the exterior Cleaning the water inlet filtersCleaning the control panel Cleaning the filterChanging the coarse filter Drying unit TA Cleaning and careOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Disposal of the packing materials Caring for the environmentDisposal of an old appliance Removing the lid if necessary InstallationLeveling the legs Protecting the countertop depending on modelPlumbing Water inletDI-Water connection Drainage Electrical connection This Appliance Must be GroundedRe-assembling the service panel Grounding the machineTechnical Data English MetricPage Page All rights reserved/3404