IMPORTANT SAFETY INSTRUCTIONS
The following points should be observed to assist in maintaining quality standards, for critical lab glassware, to protect patients, and to avoid damage to the loads being cleaned.
If the cleaning result is subject to particularly stringent requirements
(e.g. chemical analysis, specialized process), a regular quality control test should be carried out by the user to ensure that required standards of cleanliness are being achieved.
If toxic or chemical substances are possible in the wash water regard the higher risk when interrupting a wash
cycle and opening the door. Always check the seal of the door and the function of the steam condensator.
Use only Miele approved cleaning agents with this machine. Use of
unsuitable cleaning agents could adversely affect the components of the machine. Damages resulting from using unsuitable cleaning agents are not covered by the warranty.
cleaning agents with a chemical interaction, can cause foam. For
When a chemical additive is recommended, the manufacturer of
the machine takes no responsibility for the effect of the chemical on the material of the items being cleaned. Please be aware that changes in formulation, storage conditions, concentration etc, which may not be publicized by the chemical producer, can have a negative effect on the cleaning result.
When using cleaning agents and specialized products it is essential
that the manufacturer’s instructions are followed. Only use the product for the application described by the manufacturer to avoid any material damage or the occurrence of strong chemical reactions.
The machine must only be operated with water and the
recommended cleaning agents. Organic solvents must not be used in the machine, as there is the danger under certain circumstances of explosion. Although this is not the case with all organic solvents, other problems could arise with their use, for example damage to rubber and synthetic materials.
6