Miele G 7835 Applications, Loading the machine, Preparing the items for cleaning

Page 19

Applications

The machine can be fitted with a variety of mobile units, baskets and inserts, depending on the cleaning application in question.

The diversity of these units and inserts is so great that it is not possible to illustrate them all or give detailed instructions on their use here. For example there are inserts for direct spraying or rinsing glassware which contain internal surfaces, tubes and pipes that need stringent cleaning.

Loading the machine

Removing excess soils

^Empty all containers before loading them into the machine.

,Ensure that no acid or solvent residues, especially hydrochloric acid or chlorides get into the wash cabinet.

Preparing the items for cleaning

–Are the items to clean correctly sorted and connected?

–Are the spray arms clean and can they rotate freely?

–Is the filter combination free of coarse soiling?

–Is the adapter to the water inlet in place?

–Are the spray arms correctly connected?

–Are the detergent and neutralizer containers full?

19

Image 19

Contents Laboratory glassware washer G Contents Contents Use Important Safety InstructionsImportant Safety Instructions Important Safety Instructions Disposal of an old appliance Using accessoriesElectronic controls Guide to the machineCursor right Door switch h Start buttonDisplay On/Off button Cursor leftGuide to the machine To close the door Opening and closing the doorElectric door lock Opening the doorWater softener Softener Capacity Setting the water softenerSelect Unit Enter Water HardnessFilling the salt reservoir Salt indicator Mobile unit coding Automatic mobile unit recognition AWKMobile unit coding strip Setting mobile unit codingSet the program place coding Removing excess soils Preparing the items for cleaningApplications Loading the machineApplications Example upper basket O 190/1 and lower basket U Height adjustable top basketTo adjust the upper basket Spring adapter water connectionInjector unit 1/1 With connection to TA Laboratory glassware LGPreparing the DOS dispensers Adding of liquid detergents and neutralizersAdditional DOS modules optional Filling the containers with liquid cleaning agents Optional Dispensing system maintenancePriming the liquid dispensing systems External Dispensing systemsTo change the operating level Power switchOperation Turning onFixed program Starting a programFree program selection Turning off Program sequenceAutomatic mobile unit recognition AWK Operating levels B or D To change or cancel a programOperating levels a or C Cancelling a program Serial interface Cleaning the filters in the wash cabinet Cleaning and CareCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Tilt the locking clamp to the side Cleaning the drain pump and non-return valveCleaning the filter Cleaning the water inlet filtersCleaning the control panel Cleaning the exteriorChanging the coarse filter Drying unit TA Cleaning and careOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Disposal of the packing materials Caring for the environmentDisposal of an old appliance Protecting the countertop depending on model InstallationLeveling the legs Removing the lid if necessaryWater inlet PlumbingDI-Water connection Drainage This Appliance Must be Grounded Electrical connectionGrounding the machine Re-assembling the service panelEnglish Metric Technical DataPage Page All rights reserved/3404