Miele G 7835 operating instructions Important Safety Instructions, Use

Page 4

IMPORTANT SAFETY INSTRUCTIONS

This machine conforms to current safety requirements. Inappropriate use can however lead to personal injury and property damage. Read the operating instructions carefully before starting to use this machine. Keep these instructions in a safe place, and make them available to future users.

Use

This machine is designed for commercial use and for

specialized applications only, as described in these Operating Instructions. Do not use for purposes other than those for which it was designed, as this might be dangerous. The programs are designed for laboratory glassware which are declared reprocessable. Regard the information from the glassware manufacturer.

Miele is not responsible for damages caused by improper use.

The installation of this unit in non stationary locations (e.g. ships)

must be performed by a qualified installer or service agency, in strict accordance with national and local safety regulations and standards.

Please pay attention to the following notes, to maintain safe procedures.

The machine should be commissioned and then maintained only by a Miele Service Technician. Repairs by unqualified

persons could be dangerous.

Do not install the machine in an area where a danger of explosion

or freezing may be present.

Be certain this appliance is properly installed and grounded by

an authorized technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system checked by a qualified technician. The manufacturer cannot be held responsible for damage or injury caused by the lack of or inadequacy of an effective grounding system (e.g. electric shock).

A damaged machine is dangerous. Turn off the machine immediately at

the main switch and call the Miele Service Department.

Personnel operating the machine should be trained regularly.

Children and untrained personnel must not be allowed access to the machine or its controls.

4

Image 4

Contents Laboratory glassware washer G Contents Contents Important Safety Instructions UseImportant Safety Instructions Important Safety Instructions Using accessories Disposal of an old applianceGuide to the machine Electronic controlsDoor switch h Start button DisplayOn/Off button Cursor left Cursor rightGuide to the machine Opening and closing the door Electric door lockOpening the door To close the doorWater softener Setting the water softener Select UnitEnter Water Hardness Softener CapacityFilling the salt reservoir Salt indicator Automatic mobile unit recognition AWK Mobile unit codingSetting mobile unit coding Mobile unit coding stripSet the program place coding Preparing the items for cleaning ApplicationsLoading the machine Removing excess soilsApplications Height adjustable top basket To adjust the upper basketSpring adapter water connection Example upper basket O 190/1 and lower basket ULaboratory glassware LG Injector unit 1/1 With connection to TAPreparing the DOS dispensers Adding of liquid detergents and neutralizersAdditional DOS modules optional Filling the containers with liquid cleaning agents Dispensing system maintenance Priming the liquid dispensing systemsExternal Dispensing systems OptionalPower switch OperationTurning on To change the operating levelFixed program Starting a programFree program selection Turning off Program sequenceAutomatic mobile unit recognition AWK Operating levels B or D To change or cancel a programOperating levels a or C Cancelling a program Serial interface Cleaning the filters in the wash cabinet Cleaning and CareCleaning the coarse filter Cleaning the fine, flat and micro-fine filters Cleaning the drain pump and non-return valve Tilt the locking clamp to the sideCleaning the water inlet filters Cleaning the control panelCleaning the exterior Cleaning the filterChanging the coarse filter Drying unit TA Cleaning and careOpen the door of the storage cabinet Replacing the HEPA-Filter Frequently asked questions After sales service Page Installation Instructions Disposal of the packing materials Caring for the environmentDisposal of an old appliance Installation Leveling the legsRemoving the lid if necessary Protecting the countertop depending on modelPlumbing Water inletDI-Water connection Drainage Electrical connection This Appliance Must be GroundedRe-assembling the service panel Grounding the machineTechnical Data English MetricPage Page All rights reserved/3404