Miele PT 7136 PLUS installation manual Other faults

Frequently asked questions

Other faults

What if ...	Possible fault	Solution
The program	In some cases "Clean out airways" is displayed. See
runs too long or	"Settings - Supervisor level - Clean the airways". Open and
stops.	close the dryer door.
	The air supply is	Open a window or door to
	insufficient.	increase the air flow.
	The lint filter is clogged	Remove the lint.
	with lint.
	The exhaust hose or the	– Check the exhaust parts
	connection is clogged with	regularly (e.g. wall vent duct,
	lint.	louvered wall vent, bends,
		etc.) for air permeability.
		– Remove the lint.
	The laundry was not spun	Spin laundry thoroughly before
	sufficiently in the washer.	drying.
	The dryer has over-loaded.	Regard the maximum load size
		per program.
	Metallic zippers prevent a	– Open the zippers of the
	correct measurement of	laundry before drying.
	the laundry’s residual	If the problem persists, dry
	moisture.	items with long zippers using
		the "Warm air" program.
The laundry is	The load contained too	– Continue drying using the
not dry enough.	many dissimilar items (size	"Warm air" program.
	and fabrics.)	– See the "Program Guide" for
		suitable programs.

28