Miele PT 7136 PLUS installation manual Language, Anti-crease Time of day, Off, Normal, Loud

Page 55

Settings ￿

Language ￿

Buzzer

The displayed language can be set in the submenu "Language ￿".

The flag behind the word "Language ￿" is a guide to find the settings menu in case a foreign language is selected.

￿Select the desired language and confirm.

The change is only valid for the current program. At the end of the program the display language will change back to the language set in the "Settings - Supervisor level".

The display will change back to the default language setting if no further entry is made within 15 seconds after setting a new language.

When the buzzer is selected a tone sounds at the end of the program.

off

The end-of-program buzzer is turned off (default setting).

However, it does not turn off the warning tone which indicates a fault message.

normal

The buzzer sounds "normal" at the end of a program.

loud

The buzzer sounds "loud" at the end of a program.

Anti-crease

Time of day

The drum will continue to turn in intervals for one hour after the program has ended if the laundry is not immediately removed.

Default setting: on

The selection allows the clock to be shown as 24 hours, 12 hours or not at all. Afterwards the clock will be set to the current time of day.

If the option "Time not displayed" is selected, the "Timer" will be displayed as a 24 hour clock.

￿Select the desired clock display and confirm.

The display changes to the clock setting.

￿Select the hour with the jog shuttle and confirm. Select the minutes and confirm. The time of day is saved.

55

Image 55
Contents Operating and Installation manual Vented Dryer PT 7136 Plus Contents Contents Important Safety Instructions Important Safety Instructions Save These Instructions Control panel Guide to the dryerProgram selection possibility Display functionMain menu Jog shuttleMenu Program selection SettingsBasic menu of a drying program Set the time of day Before using for the first timeWelcome screen LanguageFabric care labels UseDrying tips Load the laundry Sort the laundryStarting a program Select Low temp. and/or TimerSelect a program Insert coins if operated by coin mechanismBefore the end of a program Cleaning and care hintsAt the end of a program Remaining timeContinue drying Canceling a programCoin mechanism Adding/removing laundry during a drying programProgram guide Warm air Woollen handcareSmoothing Cool airProofing JeansNormal, Hand iron ShirtsCanceling the timer TimerSelect the submenu Timer Starting the timer functionSelecting/Changing a Favorite FavoritesBasic menu Program Warm air, Cool air Drying level programsOther programs Saving a Favorite Low tempAssigning a direct select button Disassembling the lint filter Cleaning and CareCleaning the lint filter Removing the lint filterClean the lint filters wet Clean the lint filters dryInserting the lint filter Cleaning the exterior and the control panelCheck and fault messages in the display Frequently asked questionsWhat if Possible cause Solution Program What if Possible cause Solution At the end of aAppears Other faults Items made What if Possible fault Solution What if there isCondensed water Drum?Display remains What if Possible cause Solution Program cannotStart indicator Be started,Changing the light bulb Optional accessories After sales serviceInstallation Instructions Important Safety Instructions Save These Instructions Front view InstallationSide view Rear view Top view Washer/ Dryer Stack Installation on a cement base Coin mechanism Transporting the dryer to the installation site InstallationLevel the dryer Electrical connection General notes Installation of exhaust ventingHow to calculate the effective duct length Tips about the ductwork Additional duct lengths 4 rigid pipe only Length Changing the position of the exhaust connection Determining the position of the exhaust connectionWall connection with rigid pipe Window connectionChimney connection Dryer top view Direct wall connectionCollective exhaust duct Technical Data Disposal of the packing materials Caring for the environmentDisposal of an appliance Menu Settings To adjust standard settings Leaving the Settings menu SettingsOpening the menu Settings Selecting SettingsNormal LanguageAnti-crease Time of day OffStandby Not during current program default settingDelivery status 0 minutes normal cooling down phase Contrast/BrightnessEntering the code Settings Supervisor levelSupervisor level Sort languagesLanguage entry Drying levels TimerCool air free Cleaning the airways Cleaning the lint filtersNormal Factory default Light Display the residual moisture as a percentagePage Page Page All rights reserved Nr 975 240