Uwpv Models

Basic Installation/Operation

Dimensional Clearances

Allow a minimum of 24 inches (60 cm) at the rear and 18 inches (45 cm) at the sides for maintenance, inspection and adjustment. Allow at least 18 inches (45 cm) between machines in multiple installations. Machine dimensions are indicated in Figure 4 and specified in Table 8.

NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or the manufacturer. We reserve the right to make changes at any time without notice.

UWPV Pocket Hardmount Machine Dimensions (Refer to Figure 4 and Figure 5)

Dimension	35			60		80		100	125			150

	in	mm	in	mm	in	mm	in	mm	in	mm	in	mm
	in	mm	in	mm	in	mm	in	mm	in	mm	in	mm

A	30.12	765	35.63	905	41.12	1045	41.12	1045	48	1219	50.25	1277

B1	33.39	847	36.63	930	41.5	1054	41.5	1054	48	1219	50.25	1277
C	23.75	603	28.25	718	29	737	29	737	29	737	32	813

D	43.63	1108	45	1143	51.5	1308	54.5	1384	58	1473	63	100

E2	.5	13	1	25	3	76	3	76	1.5	38	2.9	4.6
F	55.5	1410	64.5	1638	68.5	1740	68.5	1740	72	1829	79	2007

G2	36	914	36	914	43.75	1111	43.75	1111	48	1219	56	1422
H	8	203	15.52	394	16.88	429	16.88	429	11.38	289	15.75	400

I	43.88	1114	55	1397	58.5	1486	58.5	1486	63.38	1610	70.25	1778

1Overhang dimensions for the optional starch dispenser are as follows: UW35PV, 3.88 inches (9.86 cm); UW60PV, 1.75 inches

(4.45 cm); UW80PV and UW100PV, 0.33 inches (0.83 cm). (The starch dispenser does not overhang the UW125PV.) (No longer available.)

2The overhang dimension for the premium wet clean module option (compatible with wet-clean-capable washer-extractors only) adds 24 inches (60.96 cm) to combined machine dimensions E and G.

Table 8

F232156