Alliance Laundry Systems P232156R9 manual Operation, UW Models With UniLinc Control

Page 31

Basic Installation/Operation

Operation

UW Models With UniLinc Control

1.When display shows the Cycle Menu Screen washer-extractor is ready to be loaded with laundry.

2.On UW35-UW150 models. Press the door unlock button located on the lower left front on the control. Refer to Figure 8.

3.Open door within five seconds of pressing the door unlock keypad.

UW35 – UW150 MODELS

PHM705N

Figure 8

4.On 35 – 125 models, turn door handle clockwise and swing the door left to open. Door must be opened within 5 seconds of pressing the door unlock button. Refer to Figure 9.

UW35 – UW125 MODELS

MD004J

Figure 9

5.On 150 models, turn handle counterclockwise and swing the door right to open. Door must be opened within 5 seconds of pressing the door

unlock button. Refer to Figure 10.

150 MODELS

PHM717N

Figure 10

6.Load the washer-extractor to full capacity whenever possible, but do not exceed the rated dry-weight capacity of the machine if the fabric to be washed is quite dense, closely woven, and heavily soiled.

Overloading can result in an inferior wash. The operator may need to experiment to determine load size based on fabric content, soil content, and level of cleanliness required. Do not underload the machine. Underloading can result in premature bearing and sealing failure and out- of-balance situations.

PHM590N

Figure 11

F232156

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

29

Image 31
Contents Washer-Extractors Page Contents Important Safety Instructions Explanation of Safety MessagesBasic Installation/Operation Safety Decals Operator Safety UW UniLinc and M30 Control Models General SpecificationsSpecifications 100 125 150 Overall Dimensions Weight And Shipping InformationBalance Detection Door Opening InformationDrive Train Information Cylinder Speeds / Centrifugal Force DataElectrical Heating Optional UW A-Control, Variable-Speed Models Power ConsumptionWater Consumption MED UW P-Control, Variable-Speed Models Uwpv Models Specifications 100 125 150 Overall DimensionsWash/reverse, RPM / g Distribution, RPM / g Domestic shipping volume, ft.3 m3 UW 2 Speed Models UW35 UW60 Overall DimensionsCylinder Speeds/Centrifugal Force Data UW 3 Speed Models with P-Control or UW 3 Speed Models UW35 UW60 Overall Dimensions597 561 UniLinc and M30 Control Models Crush hazard100 125 150 911 14 UW150TV Uwav Models Models UW 35 Uwpv Models Uwpv Pocket Hardmount Machine Dimensions Refer to and FigureUW35PV UW125PV UW150PV 55.5 1410 64.5 1638 30.5 775 914 203 15.5 394 43.88 UW 2 Speed Models UW 3 Speed Models with P-Control or S-Control UW 3 Speed Models UW Models With UniLinc Control OperationFor Technical Service Distributor ABC UW Models With M30 Control Cycle Number Cycle Name PHM784N UW Models with S-Control Cycle is complete when display reads donE Pre-Operating Instructions UW Models with P-ControlOperating Instructions UW150 Models SW025 UW Models with A-Control Basic Installation/Operation UW Models with B-Control Basic Installation/Operation Disposal of Unit