Alliance Laundry Systems P232156R9 manual Cycle is complete when display reads donE

Page 37

6.Add dry supplies to the supply dispenser compartment cups prior to the start of each cycle.

Liquid supplies can be injected directly into the supply dispenser by an external chemical supply system.

NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washer- extractor.

7.Press the Up or Down keypad until the desired cycle number is displayed. Press the Start keypad to start the cycle.

To display the temperature of the water while cycle is running, press the Up keypad. To display the number of the cycle in progress, press the Start keypad.

Basic Installation/Operation

NOTE: Press keypads at their centers just hard enough to activate them.

8. Cycle is complete when display reads “donE”.

NOTE: A cycle can be stopped at any time by pressing the Stop keypad.

F232156

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

35

Image 37

Contents Washer-Extractors Page Contents Important Safety Instructions Explanation of Safety MessagesBasic Installation/Operation Safety Decals Operator Safety Specifications 100 125 150 Overall Dimensions General SpecificationsWeight And Shipping Information UW UniLinc and M30 Control ModelsDrive Train Information Door Opening InformationCylinder Speeds / Centrifugal Force Data Balance DetectionElectrical Heating Optional UW A-Control, Variable-Speed Models Power ConsumptionWater Consumption MED UW P-Control, Variable-Speed Models Uwpv Models Specifications 100 125 150 Overall DimensionsWash/reverse, RPM / g Distribution, RPM / g Domestic shipping volume, ft.3 m3 UW 2 Speed Models UW35 UW60 Overall DimensionsCylinder Speeds/Centrifugal Force Data UW 3 Speed Models with P-Control or UW 3 Speed Models UW35 UW60 Overall Dimensions597 561 UniLinc and M30 Control Models Crush hazard100 125 150 911 14 UW150TV Uwav Models Models UW 35 Uwpv Models Uwpv Pocket Hardmount Machine Dimensions Refer to and FigureUW35PV UW125PV UW150PV 55.5 1410 64.5 1638 30.5 775 914 203 15.5 394 43.88 UW 2 Speed Models UW 3 Speed Models with P-Control or S-Control UW 3 Speed Models UW Models With UniLinc Control OperationFor Technical Service Distributor ABC UW Models With M30 Control Cycle Number Cycle Name PHM784N UW Models with S-Control Cycle is complete when display reads donE Pre-Operating Instructions UW Models with P-ControlOperating Instructions UW150 Models SW025 UW Models with A-Control Basic Installation/Operation UW Models with B-Control Basic Installation/Operation Disposal of Unit