Alliance Laundry Systems P232156R9 manual PHM784N

Page 35

Basic Installation/Operation

Models Equipped with Both Steam and Electric Heating (UniLinc and M30 Controls)

1.To switch between the heating type, locate the switch on the left side of control module. Refer to Figure 17.

2.To select steam heat, make sure the switch is in the down position.

OR

To select electric heat, make sure the switch is in the up position.

PHM784N

PHM784N

Figure 17

F232156

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

33

Image 35

Contents Washer-Extractors Page Contents Important Safety Instructions Explanation of Safety MessagesBasic Installation/Operation Safety Decals Operator Safety UW UniLinc and M30 Control Models General SpecificationsSpecifications 100 125 150 Overall Dimensions Weight And Shipping InformationBalance Detection Door Opening InformationDrive Train Information Cylinder Speeds / Centrifugal Force DataElectrical Heating Optional Water Consumption Power ConsumptionUW A-Control, Variable-Speed Models MED UW P-Control, Variable-Speed Models Uwpv Models Specifications 100 125 150 Overall DimensionsWash/reverse, RPM / g Distribution, RPM / g Domestic shipping volume, ft.3 m3 UW 2 Speed Models UW35 UW60 Overall DimensionsCylinder Speeds/Centrifugal Force Data UW 3 Speed Models with P-Control or UW 3 Speed Models UW35 UW60 Overall Dimensions597 561 100 125 150 Crush hazardUniLinc and M30 Control Models 911 14 UW150TV Uwav Models Models UW 35 Uwpv Models Uwpv Pocket Hardmount Machine Dimensions Refer to and FigureUW35PV UW125PV UW150PV 55.5 1410 64.5 1638 30.5 775 914 203 15.5 394 43.88 UW 2 Speed Models UW 3 Speed Models with P-Control or S-Control UW 3 Speed Models UW Models With UniLinc Control OperationFor Technical Service Distributor ABC UW Models With M30 Control Cycle Number Cycle Name PHM784N UW Models with S-Control Cycle is complete when display reads donE Operating Instructions UW Models with P-ControlPre-Operating Instructions UW150 Models SW025 UW Models with A-Control Basic Installation/Operation UW Models with B-Control Basic Installation/Operation Disposal of Unit